Re: [PATCH] usb: cdns3: Fix for incorrect DMA mask.

From: Roger Quadros
Date: Mon Oct 07 2019 - 08:20:38 EST




On 07/10/2019 15:03, Pawel Laszczak wrote:
This patch restores the correct DMA mask after switching back to device
mode.
The issue occurred because Device part of controller use 32 bits DMA and
Host side use 64 bits DMA. During loading XHCI driver the DMA mask
used by driver is overwritten by XHCI driver so it must be restored
to 32 bits.

Reported-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")

Tested-by: Roger Quadros <rogerq@xxxxxx>

---
drivers/usb/cdns3/gadget.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 157536753b8c..2ca280f4c054 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -2663,6 +2663,13 @@ static int __cdns3_gadget_init(struct cdns3 *cdns)
{
int ret = 0;
+ /* Ensure 32-bit DMA Mask in case we switched back from Host mode */
+ ret = dma_set_mask_and_coherent(cdns->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(cdns->dev, "Failed to set dma mask: %d\n", ret);
+ return ret;
+ }
+
cdns3_drd_switch_gadget(cdns, 1);
pm_runtime_get_sync(cdns->dev);


--
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki