[PATCH] usb: cdns3: Fix for incorrect DMA mask.

[Pawel Laszczak]

This patch restores the correct DMA mask after switching back to device
mode.
The issue occurred because Device part of controller use 32 bits DMA and
Host side use 64 bits DMA. During loading XHCI driver the DMA mask
used by driver is overwritten by XHCI driver so it must be restored
to 32 bits.

Reported-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
---
 drivers/usb/cdns3/gadget.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 157536753b8c..2ca280f4c054 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -2663,6 +2663,13 @@ static int __cdns3_gadget_init(struct cdns3 *cdns)
 {
 	int ret = 0;
 
+	/* Ensure 32-bit DMA Mask in case we switched back from Host mode */
+	ret = dma_set_mask_and_coherent(cdns->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(cdns->dev, "Failed to set dma mask: %d\n", ret);
+		return ret;
+	}
+
 	cdns3_drd_switch_gadget(cdns, 1);
 	pm_runtime_get_sync(cdns->dev);
 
-- 
2.17.1