[PATCH 2/3] ARM: dts: imx6qdl-zii-rdu2: Fix accelerometer interrupt-names

[Andrey Smirnov]

According to Documentation/devicetree/bindings/iio/accel/mma8452.txt,
the correct interrupt-names are "INT1" and "INT2", so fix them
accordingly.

While at it, modify the node to only specify "INT2" since providing
two interrupts is not necessary or useful (the driver will only use
one).

Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
[andrew.smirnov@xxxxxxxxx modified the patch to drop INT1]
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx,
Cc: linux-kernel@xxxxxxxxxxxxxxx
---

Original patch from Fabio can be seen here:

https://lore.kernel.org/linux-arm-kernel/20191010125300.2822-1-festevam@xxxxxxxxx/

 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 8d46f7b2722b..a8c86e621b49 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -358,8 +358,8 @@
 		compatible = "fsl,mma8451";
 		reg = <0x1c>;
 		interrupt-parent = <&gpio1>;
-		interrupt-names = "int1", "int2";
-		interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT2";
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	hpa2: amp@60 {
@@ -849,7 +849,6 @@
 &iomuxc {
 	pinctrl_accel: accelgrp {
 		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x4001b000
 			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x4001b000
 		>;
 	};
-- 
2.21.0