RE: [alsa-devel] [PATCH] ASoC: eve: implement set_bias_level function for rt5514

From: Lu, Brent
Date: Fri Oct 25 2019 - 10:43:18 EST

> On 10/25/19 4:11 AM, Brent Lu wrote:
> > The first DMIC capture always fail (zero sequence data from PCM port)
> > after using DSP hotwording function (i.e. Google assistant).
> Can you clarify where the DSP hotwording is done? Intel DSP or rt5514?
> Turning on the MCLK with the BIAS info might force the Intel DSP to remain
> on, which would impact power consumption if it was supposed to remain off.

Hi Pierre,

It's done in rt5514's DSP and the interface is SPI instead of I2S for the voice wake
up function.

There is a driver rt5514-spi.c which provides platform driver and DAI. User space
application first uses the mixer to turn on the voice wake up function:

amixer -c0 cset name='DSP Voice Wake Up' on

Then open and read data from the PCM port which goes to the SPI platform and
dai code. Finally it uses same mixer to turn off the function and return to normal
codec mode. The DMIC recording (from I2S) and the voice wake on function should
be mutually exclusive according to the driver design.

In the codec driver rt5514.c there is a rt5514_set_bias_level function. It's expected to
turn on/off mclk here according to Realtek people's say but our ssp clock requires set
rate function to be called in advance so I implement the code in machine driver.

> > This rt5514 codec requires to control mclk directly in the
> > set_bias_level function. Implement this function in machine driver to
> > control the ssp1_mclk clock explicitly could fix this issue.
> >
> > Signed-off-by: Brent Lu <>