Re: [PATCH v3 07/11] arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device

[Stephen Boyd]

Quoting kgunda@xxxxxxxxxxxxxx (2019-10-29 23:06:43)
> On 2019-10-29 22:11, Stephen Boyd wrote:
> > Quoting Rajendra Nayak (2019-10-23 02:02:15)
> >> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
> >> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> >> index 04808a07d7da..6584ac6e6c7b 100644
> >> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> >> @@ -224,6 +224,25 @@
> >>                         };
> >>                 };
> >> 
> >> +               spmi_bus: spmi@c440000 {
> >> +                       compatible = "qcom,spmi-pmic-arb";
> >> +                       reg = <0 0xc440000 0 0x1100>,
> > 
> > Please pad out the registers to 8 numbers. See sdm845.
> Ok.. Will address it in the next series.
> > 
> >> +                             <0 0xc600000 0 0x2000000>,
> >> +                             <0 0xe600000 0 0x100000>,
> >> +                             <0 0xe700000 0 0xa0000>,
> >> +                             <0 0xc40a000 0 0x26000>;
> >> +                       reg-names = "core", "chnls", "obsrvr", "intr", 
> >> "cnfg";
> >> +                       interrupt-names = "periph_irq";
> >> +                       interrupts-extended = <&pdc 1 
> >> IRQ_TYPE_LEVEL_HIGH>;
> > 
> > This is different than sdm845. I guess pdc is working?
> > 
> Yes. For SDM845 pdc controller support was not yet added. That's why 
> still the GIC interrupt is used.
> Where as for SC7180 the same is added with 
> https://lore.kernel.org/patchwork/patch/1143335/.
> 
> Yes. pdc is working.

Cool. The patch that adds pdc to the DT should come before this one
then. In reality, it would be better if it was all squashed down into
one big commit that just introduces the SoC file and one commit for
PMICs and then one commit for the idp board. Then we don't have this
ordering problem.