[PATCH 4/4] ARM: dts: ux500: Remove ux500_ prefix from ux500_serial* labels

[Stephan Gerhold]

ux500_serial{0,1,2} are the only labels with ux500_ prefix in
ste-dbx5x0.dtsi, the other labels (gpio0, msp, ...) do not use
any prefix. Remove it for consistency.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 841934093c3b..d4a55369452d 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -24,9 +24,9 @@
 		spi1 = &spi1;
 		spi2 = &spi2;
 		spi3 = &spi3;
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
 	};
 
 	chosen {
@@ -838,7 +838,7 @@
 			status = "disabled";
 		};
 
-		ux500_serial0: uart@80120000 {
+		serial0: uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -853,7 +853,7 @@
 			status = "disabled";
 		};
 
-		ux500_serial1: uart@80121000 {
+		serial1: uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -868,7 +868,7 @@
 			status = "disabled";
 		};
 
-		ux500_serial2: uart@80007000 {
+		serial2: uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.24.0