Re: [PATCH] usb: gadget: f_ncm: fix wrong usb_ep

[Henry Lin]

>> >Would you please share the use case how to reproduce it?
>> We checked again and found NCM gadget driver should not have this issue.
>> Please ignore this patch.
>>
>> However, we still observe similar issue in ECM and RNDIS gadget driver. Take
>> ECM as example, if we plug ECM gadget in high-speed host port first. And, the host
>> only set interface with alternate setting != 1 (alt != 1 in ecm_set_alt()) for ECM
>> gadget. Then, if we unplug gadget from high-speed host port to another super-
>> speed host port afterwards, we will see both in_ep->desc and out_ep->desc in ecm-
> >port keep values for high-speed endpoints. Although NCM's implementation is
>> similar to ECM in this part, NCM doesn't have same issue as it only does
>> config_ep_by_speed() under if alt is 1.

>Does your UDC driver call composite_disconnect when disconnect from the host?
>It should set all desc to NULL at related function ->disable.

For ECM case, if ecm_set_alt() gets called with alt == 0, in_ep->desc and
out_ep->desc will be set up. But these two ep will not be enabled as gether_connect()
is not executed. During disconnect from the host, ecm_disable() gets called with ep
disabled. In this case, gether_disconnect() will not get called to set desc to NULL.