Re: [PATCH v3] ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC

[Manikandan]

On Mon, Nov 25, 2019 at 07:23:32PM +0000, Vijay Khemka wrote:
> 
> ïOn 11/25/19, 5:04 AM, "manikandan-e" <manikandan.hcl.ers.epl@xxxxxxxxx> wrote:
> 
>     The Yosemite V2 is a facebook multi-node server
>     platform that host four OCP server. The BMC
>     in the Yosemite V2 platorm based on AST2500 SoC.
>     
>     This patch adds linux device tree entry related to
>     Yosemite V2 specific devices connected to BMC SoC.
> Nit: comments inline. Otherwise
> Reviewed-by: Vijay Khemka <vijaykhemka@xxxxxx>
>     
> 
>     Signed-off-by: manikandan-e <manikandan.hcl.ers.epl@xxxxxxxxx>
>     ---
>      .../boot/dts/aspeed-bmc-facebook-yosemitev2.dts    | 151 +++++++++++++++++++++
>      1 file changed, 151 insertions(+)
>      create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
>     
>     diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
>     new file mode 100644
>     index 0000000..09bffcd
>     --- /dev/null
>     +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
>     @@ -0,0 +1,151 @@
>     +// SPDX-License-Identifier: GPL-2.0+
>     +// Copyright (c) 2018 Facebook Inc.
>     +/dts-v1/;
>     +
>     +#include "aspeed-g5.dtsi"
>     +#include <dt-bindings/gpio/aspeed-gpio.h>
>     +
>     +/ {
>     +	model = "Facebook Yosemitev2 BMC";
>     +	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
>     +	aliases {
>     +		serial4 = &uart5;
>     +	};
>     +	chosen {
>     +		stdout-path = &uart5;
>     +		bootargs = "console=ttyS4,115200 earlyprintk";
> bootargs are not required as it is overwritten by uboot. And baud rate is 57600
           
          As of now SPL and U-boot Baudrate based 115200 baudrate. Do we need to change it there. I understand that we can use SERIAL_CONSOLES           in meta-facebook.
          Do i need to remove 'console=ttyS4.115200' or complete bootargs . If we remove bootargs, how can add any bootargs params in future.

>     +	};
>     +
>     +	memory@80000000 {
>     +		reg = <0x80000000 0x20000000>;
>     +	};
>     +
>     +	iio-hwmon {
>     +		// VOLATAGE SENSOR
>     +		compatible = "iio-hwmon";
>     +		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
>     +		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
>     +		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
>     +		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
>     +	};
>     +};
>     +
>     +&fmc {
>     +	status = "okay";
>     +	flash@0 {
>     +		status = "okay";
>     +		m25p,fast-read;
>     +#include "openbmc-flash-layout.dtsi"
>     +	};
>     +};
>     +
>     +&spi1 {
>     +	status = "okay";
>     +	pinctrl-names = "default";
>     +	pinctrl-0 = <&pinctrl_spi1_default>;
>     +	flash@0 {
>     +		status = "okay";
>     +		m25p,fast-read;
>     +		label = "pnor";
>     +	};
>     +};
>     +
>     +&uart5 {
>     +	// BMC Console
>     +	status = "okay";
>     +};
>     +
>     +&mac0 {
>     +	status = "okay";
>     +	pinctrl-names = "default";
>     +	pinctrl-0 = <&pinctrl_rmii1_default>;
>     +	use-ncsi;
>     +};
>     +
>     +&adc {
>     +	status = "okay";
>     +        pinctrl-names = "default";
> Use tab for alignment


Checkpatch didn't shown any issue warning .As i checked in many dts file , format is same.
It will helpful if i get more clarification. 

>     +	pinctrl-0 = <&pinctrl_adc0_default
>     +			&pinctrl_adc1_default
>     +			&pinctrl_adc2_default
>     +			&pinctrl_adc3_default
>     +			&pinctrl_adc4_default
>     +			&pinctrl_adc5_default
>     +			&pinctrl_adc6_default
>     +			&pinctrl_adc7_default
>     +			&pinctrl_adc8_default
>     +			&pinctrl_adc9_default
>     +			&pinctrl_adc10_default
>     +			&pinctrl_adc11_default
>     +			&pinctrl_adc12_default
>     +			&pinctrl_adc13_default
>     +			&pinctrl_adc14_default
>     +			&pinctrl_adc15_default>;
>     +};
>     +
>     +&i2c8 {
>     +	status = "okay";
>     +	//FRU EEPROM
>     +	eeprom@51 {
>     +		compatible = "atmel,24c64";
>     +		reg = <0x51>;
>     +		pagesize = <32>;
>     +	};
>     +};
>     +
>     +&i2c9 {
>     +	status = "okay";
>     +	tmp421@4e {
>     +	//INLET TEMP
>     +		compatible = "ti,tmp421";
>     +		reg = <0x4e>;
>     +	};
>     +	//OUTLET TEMP
>     +	tmp421@4f {
>     +		compatible = "ti,tmp421";
>     +		reg = <0x4f>;
>     +	};
>     +};
>     +
>     +&i2c10 {
>     +	status = "okay";
>     +	//HSC
>     +	adm1278@40 {
>     +		compatible = "adi,adm1278";
>     +		reg = <0x40>;
>     +	};
>     +};
>     +
>     +&i2c11 {
>     +	status = "okay";
>     +	//MEZZ_TEMP_SENSOR
>     +	tmp421@1f {
>     +		compatible = "ti,tmp421";
>     +		reg = <0x1f>;
>     +	};
>     +};
>     +
>     +&i2c12 {
>     +	status = "okay";
>     +	//MEZZ_FRU
>     +	eeprom@51 {
>     +		compatible = "atmel,24c64";
>     +		reg = <0x51>;
>     +		pagesize = <32>;
>     +	};
>     +};
>     +
>     +&pwm_tacho {
>     +	status = "okay";
>     +	//FSC
>     +	pinctrl-names = "default";
>     +	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
>     +	fan@0 {
>     +		reg = <0x00>;
>     +		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
>     +	};
>     +	fan@1 {
>     +		reg = <0x01>;
>     +		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
>     +	};
>     +};
>     -- 
>     2.7.4
>     
>     
>