[PATCH 4.19 061/306] pwm: lpss: Only set update bit if we are actually changing the settings

From: Greg Kroah-Hartman
Date: Wed Nov 27 2019 - 15:57:32 EST


From: Hans de Goede <hdegoede@xxxxxxxxxx>

[ Upstream commit 2153bbc12f77fb2203276befc0f0dddbfb023bb1 ]

According to the datasheet the update bit must be set if the on-time-div
or the base-unit changes.

Now that we properly order device resume on Cherry Trail so that the GFX0
_PS0 method no longer exits with an error, we end up with a sequence of
events where we are writing the same values twice in a row.

First the _PS0 method restores the duty cycle of 0% the GPU driver set
on suspend and then the GPU driver first updates just the enabled bit in
the pwm_state from 0 to 1, causing us to write the same values again,
before restoring the pre-suspend duty-cycle in a separate pwm_apply call.

When writing the update bit the second time, without changing any of
the values the update bit clears immediately / instantly, instead of
staying 1 for a while as usual. After this the next setting of the update
bit seems to be ignored, causing the restoring of the pre-suspend
duty-cycle to not get applied. This makes the backlight come up with
a 0% dutycycle after suspend/resume.

Any further brightness changes after this do work.

This commit moves the setting of the update bit into pwm_lpss_prepare()
and only sets the bit if we have actually changed any of the values.

This avoids the setting of the update bit the second time we configure
the PWM to 0% dutycycle, this fixes the backlight coming up with 0%
duty-cycle after a suspend/resume.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/pwm/pwm-lpss.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 4721a264bac25..1e69c1c9ec096 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -97,7 +97,7 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
unsigned long long on_time_div;
unsigned long c = lpwm->info->clk_rate, base_unit_range;
unsigned long long base_unit, freq = NSEC_PER_SEC;
- u32 ctrl;
+ u32 orig_ctrl, ctrl;

do_div(freq, period_ns);

@@ -114,13 +114,17 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
do_div(on_time_div, period_ns);
on_time_div = 255ULL - on_time_div;

- ctrl = pwm_lpss_read(pwm);
+ orig_ctrl = ctrl = pwm_lpss_read(pwm);
ctrl &= ~PWM_ON_TIME_DIV_MASK;
ctrl &= ~(base_unit_range << PWM_BASE_UNIT_SHIFT);
base_unit &= base_unit_range;
ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
ctrl |= on_time_div;
- pwm_lpss_write(pwm, ctrl);
+
+ if (orig_ctrl != ctrl) {
+ pwm_lpss_write(pwm, ctrl);
+ pwm_lpss_write(pwm, ctrl | PWM_SW_UPDATE);
+ }
}

static inline void pwm_lpss_cond_enable(struct pwm_device *pwm, bool cond)
@@ -144,7 +148,6 @@ static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
return ret;
}
pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period);
- pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_SW_UPDATE);
pwm_lpss_cond_enable(pwm, lpwm->info->bypass == false);
ret = pwm_lpss_wait_for_update(pwm);
if (ret) {
@@ -157,7 +160,6 @@ static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (ret)
return ret;
pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period);
- pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_SW_UPDATE);
return pwm_lpss_wait_for_update(pwm);
}
} else if (pwm_is_enabled(pwm)) {
--
2.20.1