[PATCH] clocksource: fix Kconfig miscues

From: Randy Dunlap
Date: Thu Nov 28 2019 - 00:10:30 EST


From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>

Fix lots of typo, spelling, punctuation, and grammar miscues in
drivers/clocksource/Kconfig.

Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
Interesting that NSPIRE_TIMER is for timer-zevio.c, which says
nothing about NSpire.

drivers/clocksource/Kconfig | 48 +++++++++++++++++-----------------
1 file changed, 24 insertions(+), 24 deletions(-)

--- linux-next-20191127.orig/drivers/clocksource/Kconfig
+++ linux-next-20191127/drivers/clocksource/Kconfig
@@ -88,7 +88,7 @@ config ROCKCHIP_TIMER
select TIMER_OF
select CLKSRC_MMIO
help
- Enables the support for the rockchip timer driver.
+ Enables the support for the Rockchip timer driver.

config ARMADA_370_XP_TIMER
bool "Armada 370 and XP timer driver" if COMPILE_TEST
@@ -162,13 +162,13 @@ config NPCM7XX_TIMER
select CLKSRC_MMIO
help
Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture,
- While TIMER0 serves as clockevent and TIMER1 serves as clocksource.
+ where TIMER0 serves as clockevent and TIMER1 serves as clocksource.

config CADENCE_TTC_TIMER
bool "Cadence TTC timer driver" if COMPILE_TEST
depends on COMMON_CLK
help
- Enables support for the cadence ttc driver.
+ Enables support for the Cadence TTC driver.

config ASM9260_TIMER
bool "ASM9260 timer driver" if COMPILE_TEST
@@ -190,10 +190,10 @@ config CLKSRC_DBX500_PRCMU
bool "Clocksource PRCMU Timer" if COMPILE_TEST
depends on HAS_IOMEM
help
- Use the always on PRCMU Timer as clocksource
+ Use the always on PRCMU Timer as clocksource.

config CLPS711X_TIMER
- bool "Cirrus logic timer driver" if COMPILE_TEST
+ bool "Cirrus Logic timer driver" if COMPILE_TEST
select CLKSRC_MMIO
help
Enables support for the Cirrus Logic PS711 timer.
@@ -205,11 +205,11 @@ config ATLAS7_TIMER
Enables support for the Atlas7 timer.

config MXS_TIMER
- bool "Mxs timer driver" if COMPILE_TEST
+ bool "MXS timer driver" if COMPILE_TEST
select CLKSRC_MMIO
select STMP_DEVICE
help
- Enables support for the Mxs timer.
+ Enables support for the MXS timer.

config PRIMA2_TIMER
bool "Prima2 timer driver" if COMPILE_TEST
@@ -238,10 +238,10 @@ config KEYSTONE_TIMER
Enables support for the Keystone timer.

config INTEGRATOR_AP_TIMER
- bool "Integrator-ap timer driver" if COMPILE_TEST
+ bool "Integrator-AP timer driver" if COMPILE_TEST
select CLKSRC_MMIO
help
- Enables support for the Integrator-ap timer.
+ Enables support for the Integrator-AP timer.

config CLKSRC_EFM32
bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
@@ -283,8 +283,8 @@ config CLKSRC_NPS
select TIMER_OF if OF
help
NPS400 clocksource support.
- Got 64 bit counter with update rate up to 1000MHz.
- This counter is accessed via couple of 32 bit memory mapped registers.
+ It has a 64-bit counter with update rate up to 1000MHz.
+ This counter is accessed via couple of 32-bit memory-mapped registers.

config CLKSRC_STM32
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
@@ -305,14 +305,14 @@ config ARC_TIMERS
help
These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores
(ARC700 as well as ARC HS38).
- TIMER0 serves as clockevent while TIMER1 provides clocksource
+ TIMER0 serves as clockevent while TIMER1 provides clocksource.

config ARC_TIMERS_64BIT
bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST
depends on ARC_TIMERS
select TIMER_OF
help
- This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP)
+ This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP).
RTC is implemented inside the core, while GFRC sits outside the core in
ARConnect IP block. Driver automatically picks one of them for clocksource
as appropriate.
@@ -390,7 +390,7 @@ config ARM_GLOBAL_TIMER
select TIMER_OF if OF
depends on ARM
help
- This options enables support for the ARM global timer unit
+ This option enables support for the ARM global timer unit.

config ARM_TIMER_SP804
bool "Support for Dual Timer SP804 module" if COMPILE_TEST
@@ -403,14 +403,14 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLO
depends on ARM_GLOBAL_TIMER
default y
help
- Use ARM global timer clock source as sched_clock
+ Use ARM global timer clock source as sched_clock.

config ARMV7M_SYSTICK
bool "Support for the ARMv7M system time" if COMPILE_TEST
select TIMER_OF if OF
select CLKSRC_MMIO
help
- This options enables support for the ARMv7M system timer unit
+ This option enables support for the ARMv7M system timer unit.

config ATMEL_PIT
bool "Atmel PIT support" if COMPILE_TEST
@@ -460,7 +460,7 @@ config VF_PIT_TIMER
bool
select CLKSRC_MMIO
help
- Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+ Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs.

config OXNAS_RPS_TIMER
bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
@@ -523,7 +523,7 @@ config SH_TIMER_MTU2
help
This enables build of a clockevent driver for the Multi-Function
Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
- This hardware comes with 16 bit-timer registers.
+ This hardware comes with 16-bit timer registers.

config RENESAS_OSTM
bool "Renesas OSTM timer driver" if COMPILE_TEST
@@ -580,7 +580,7 @@ config CLKSRC_TANGO_XTAL
select TIMER_OF
select CLKSRC_MMIO
help
- This enables the clocksource for Tango SoC
+ This enables the clocksource for Tango SoC.

config CLKSRC_PXA
bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST
@@ -600,15 +600,15 @@ config H8300_TMR16
bool "Clockevent timer for the H83069 platform" if COMPILE_TEST
depends on HAS_IOMEM
help
- This enables the 16 bits timer for the H8300 platform with the
- H83069 cpu.
+ This enables the 16-bits timer for the H8300 platform with the
+ H83069 CPU.

config H8300_TPU
bool "Clocksource for the H8300 platform" if COMPILE_TEST
depends on HAS_IOMEM
help
This enables the clocksource for the H8300 platform with the
- H8S2678 cpu.
+ H8S2678 CPU.

config CLKSRC_IMX_GPT
bool "Clocksource using i.MX GPT" if COMPILE_TEST
@@ -666,8 +666,8 @@ config CSKY_MP_TIMER
help
Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
system.
- csky,mptimer is not only used in SMP system, it also could be used
- single core system. It's not a mmio reg and it use mtcr/mfcr instruction.
+ csky,mptimer is not only used in SMP system, it also could be used in
+ single core system. It's not a mmio reg and it uses mtcr/mfcr instruction.

config GX6605S_TIMER
bool "Gx6605s SOC system timer driver" if COMPILE_TEST