[PATCH v6 29/49] serial: ucc_uart: replace ppc-specific IO accessors
From: Rasmus Villemoes
Date: Thu Nov 28 2019 - 09:59:04 EST
Some ARM-based SOCs (e.g. LS1021A) also have a QUICC engine. As
preparation for allowing this driver to build on ARM, replace the
ppc-specific in_be16() etc. by the qe_io* helpers. Done via
coccinelle.
Reviewed-by: Timur Tabi <timur@xxxxxxxxxx>
Acked-by: Timur Tabi <timur@xxxxxxxxxx>
Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/ucc_uart.c | 210 +++++++++++++++++-----------------
1 file changed, 102 insertions(+), 108 deletions(-)
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 7e802616cba8..8a378ee5d34f 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -258,11 +258,11 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
struct qe_bd *bdp = qe_port->tx_bd_base;
while (1) {
- if (in_be16(&bdp->status) & BD_SC_READY)
+ if (qe_ioread16be(&bdp->status) & BD_SC_READY)
/* This BD is not done, so return "not done" */
return 0;
- if (in_be16(&bdp->status) & BD_SC_WRAP)
+ if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
/*
* This BD is done and it's the last one, so return
* "done"
@@ -308,7 +308,7 @@ static void qe_uart_stop_tx(struct uart_port *port)
struct uart_qe_port *qe_port =
container_of(port, struct uart_qe_port, port);
- clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
+ qe_clrbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
}
/*
@@ -343,10 +343,10 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
p = qe2cpu_addr(bdp->buf, qe_port);
*p++ = port->x_char;
- out_be16(&bdp->length, 1);
- setbits16(&bdp->status, BD_SC_READY);
+ qe_iowrite16be(1, &bdp->length);
+ qe_setbits_be16(&bdp->status, BD_SC_READY);
/* Get next BD. */
- if (in_be16(&bdp->status) & BD_SC_WRAP)
+ if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->tx_bd_base;
else
bdp++;
@@ -365,7 +365,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
/* Pick next descriptor and fill from buffer */
bdp = qe_port->tx_cur;
- while (!(in_be16(&bdp->status) & BD_SC_READY) &&
+ while (!(qe_ioread16be(&bdp->status) & BD_SC_READY) &&
(xmit->tail != xmit->head)) {
count = 0;
p = qe2cpu_addr(bdp->buf, qe_port);
@@ -378,11 +378,11 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
break;
}
- out_be16(&bdp->length, count);
- setbits16(&bdp->status, BD_SC_READY);
+ qe_iowrite16be(count, &bdp->length);
+ qe_setbits_be16(&bdp->status, BD_SC_READY);
/* Get next BD. */
- if (in_be16(&bdp->status) & BD_SC_WRAP)
+ if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->tx_bd_base;
else
bdp++;
@@ -415,12 +415,12 @@ static void qe_uart_start_tx(struct uart_port *port)
container_of(port, struct uart_qe_port, port);
/* If we currently are transmitting, then just return */
- if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
+ if (qe_ioread16be(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
return;
/* Otherwise, pump the port and start transmission */
if (qe_uart_tx_pump(qe_port))
- setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
+ qe_setbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
}
/*
@@ -431,7 +431,7 @@ static void qe_uart_stop_rx(struct uart_port *port)
struct uart_qe_port *qe_port =
container_of(port, struct uart_qe_port, port);
- clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
+ qe_clrbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
}
/* Start or stop sending break signal
@@ -470,14 +470,14 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
*/
bdp = qe_port->rx_cur;
while (1) {
- status = in_be16(&bdp->status);
+ status = qe_ioread16be(&bdp->status);
/* If this one is empty, then we assume we've read them all */
if (status & BD_SC_EMPTY)
break;
/* get number of characters, and check space in RX buffer */
- i = in_be16(&bdp->length);
+ i = qe_ioread16be(&bdp->length);
/* If we don't have enough room in RX buffer for the entire BD,
* then we try later, which will be the next RX interrupt.
@@ -508,9 +508,10 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
}
/* This BD is ready to be used again. Clear status. get next */
- clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR |
- BD_SC_OV | BD_SC_ID, BD_SC_EMPTY);
- if (in_be16(&bdp->status) & BD_SC_WRAP)
+ qe_clrsetbits_be16(&bdp->status,
+ BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID,
+ BD_SC_EMPTY);
+ if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->rx_bd_base;
else
bdp++;
@@ -569,8 +570,8 @@ static irqreturn_t qe_uart_int(int irq, void *data)
u16 events;
/* Clear the interrupts */
- events = in_be16(&uccp->ucce);
- out_be16(&uccp->ucce, events);
+ events = qe_ioread16be(&uccp->ucce);
+ qe_iowrite16be(events, &uccp->ucce);
if (events & UCC_UART_UCCE_BRKE)
uart_handle_break(&qe_port->port);
@@ -601,17 +602,17 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
bdp = qe_port->rx_bd_base;
qe_port->rx_cur = qe_port->rx_bd_base;
for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) {
- out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT);
- out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
- out_be16(&bdp->length, 0);
+ qe_iowrite16be(BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status);
+ qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ qe_iowrite16be(0, &bdp->length);
bd_virt += qe_port->rx_fifosize;
bdp++;
}
/* */
- out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
- out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
- out_be16(&bdp->length, 0);
+ qe_iowrite16be(BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status);
+ qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ qe_iowrite16be(0, &bdp->length);
/* Set the physical address of the host memory
* buffers in the buffer descriptors, and the
@@ -622,21 +623,21 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
qe_port->tx_cur = qe_port->tx_bd_base;
bdp = qe_port->tx_bd_base;
for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) {
- out_be16(&bdp->status, BD_SC_INTRPT);
- out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
- out_be16(&bdp->length, 0);
+ qe_iowrite16be(BD_SC_INTRPT, &bdp->status);
+ qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ qe_iowrite16be(0, &bdp->length);
bd_virt += qe_port->tx_fifosize;
bdp++;
}
/* Loopback requires the preamble bit to be set on the first TX BD */
#ifdef LOOPBACK
- setbits16(&qe_port->tx_cur->status, BD_SC_P);
+ qe_setbits_be16(&qe_port->tx_cur->status, BD_SC_P);
#endif
- out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT);
- out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
- out_be16(&bdp->length, 0);
+ qe_iowrite16be(BD_SC_WRAP | BD_SC_INTRPT, &bdp->status);
+ qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ qe_iowrite16be(0, &bdp->length);
}
/*
@@ -658,78 +659,74 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
/* Program the UCC UART parameter RAM */
- out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
- out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
- out_be16(&uccup->common.mrblr, qe_port->rx_fifosize);
- out_be16(&uccup->maxidl, 0x10);
- out_be16(&uccup->brkcr, 1);
- out_be16(&uccup->parec, 0);
- out_be16(&uccup->frmec, 0);
- out_be16(&uccup->nosec, 0);
- out_be16(&uccup->brkec, 0);
- out_be16(&uccup->uaddr[0], 0);
- out_be16(&uccup->uaddr[1], 0);
- out_be16(&uccup->toseq, 0);
+ qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.rbmr);
+ qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.tbmr);
+ qe_iowrite16be(qe_port->rx_fifosize, &uccup->common.mrblr);
+ qe_iowrite16be(0x10, &uccup->maxidl);
+ qe_iowrite16be(1, &uccup->brkcr);
+ qe_iowrite16be(0, &uccup->parec);
+ qe_iowrite16be(0, &uccup->frmec);
+ qe_iowrite16be(0, &uccup->nosec);
+ qe_iowrite16be(0, &uccup->brkec);
+ qe_iowrite16be(0, &uccup->uaddr[0]);
+ qe_iowrite16be(0, &uccup->uaddr[1]);
+ qe_iowrite16be(0, &uccup->toseq);
for (i = 0; i < 8; i++)
- out_be16(&uccup->cchars[i], 0xC000);
- out_be16(&uccup->rccm, 0xc0ff);
+ qe_iowrite16be(0xC000, &uccup->cchars[i]);
+ qe_iowrite16be(0xc0ff, &uccup->rccm);
/* Configure the GUMR registers for UART */
if (soft_uart) {
/* Soft-UART requires a 1X multiplier for TX */
- clrsetbits_be32(&uccp->gumr_l,
- UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
- UCC_SLOW_GUMR_L_RDCR_MASK,
- UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
- UCC_SLOW_GUMR_L_RDCR_16);
-
- clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
- UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+ qe_clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 | UCC_SLOW_GUMR_L_RDCR_16);
+
+ qe_clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
+ UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
} else {
- clrsetbits_be32(&uccp->gumr_l,
- UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
- UCC_SLOW_GUMR_L_RDCR_MASK,
- UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
- UCC_SLOW_GUMR_L_RDCR_16);
-
- clrsetbits_be32(&uccp->gumr_h,
- UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
- UCC_SLOW_GUMR_H_RFW);
+ qe_clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 | UCC_SLOW_GUMR_L_RDCR_16);
+
+ qe_clrsetbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
+ UCC_SLOW_GUMR_H_RFW);
}
#ifdef LOOPBACK
- clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
- UCC_SLOW_GUMR_L_DIAG_LOOP);
- clrsetbits_be32(&uccp->gumr_h,
- UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
- UCC_SLOW_GUMR_H_CDS);
+ qe_clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
+ UCC_SLOW_GUMR_L_DIAG_LOOP);
+ qe_clrsetbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
+ UCC_SLOW_GUMR_H_CDS);
#endif
/* Disable rx interrupts and clear all pending events. */
- out_be16(&uccp->uccm, 0);
- out_be16(&uccp->ucce, 0xffff);
- out_be16(&uccp->udsr, 0x7e7e);
+ qe_iowrite16be(0, &uccp->uccm);
+ qe_iowrite16be(0xffff, &uccp->ucce);
+ qe_iowrite16be(0x7e7e, &uccp->udsr);
/* Initialize UPSMR */
- out_be16(&uccp->upsmr, 0);
+ qe_iowrite16be(0, &uccp->upsmr);
if (soft_uart) {
- out_be16(&uccup->supsmr, 0x30);
- out_be16(&uccup->res92, 0);
- out_be32(&uccup->rx_state, 0);
- out_be32(&uccup->rx_cnt, 0);
- out_8(&uccup->rx_bitmark, 0);
- out_8(&uccup->rx_length, 10);
- out_be32(&uccup->dump_ptr, 0x4000);
- out_8(&uccup->rx_temp_dlst_qe, 0);
- out_be32(&uccup->rx_frame_rem, 0);
- out_8(&uccup->rx_frame_rem_size, 0);
+ qe_iowrite16be(0x30, &uccup->supsmr);
+ qe_iowrite16be(0, &uccup->res92);
+ qe_iowrite32be(0, &uccup->rx_state);
+ qe_iowrite32be(0, &uccup->rx_cnt);
+ qe_iowrite8(0, &uccup->rx_bitmark);
+ qe_iowrite8(10, &uccup->rx_length);
+ qe_iowrite32be(0x4000, &uccup->dump_ptr);
+ qe_iowrite8(0, &uccup->rx_temp_dlst_qe);
+ qe_iowrite32be(0, &uccup->rx_frame_rem);
+ qe_iowrite8(0, &uccup->rx_frame_rem_size);
/* Soft-UART requires TX to be 1X */
- out_8(&uccup->tx_mode,
- UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1);
- out_be16(&uccup->tx_state, 0);
- out_8(&uccup->resD4, 0);
- out_be16(&uccup->resD5, 0);
+ qe_iowrite8(UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1,
+ &uccup->tx_mode);
+ qe_iowrite16be(0, &uccup->tx_state);
+ qe_iowrite8(0, &uccup->resD4);
+ qe_iowrite16be(0, &uccup->resD5);
/* Set UART mode.
* Enable receive and transmit.
@@ -743,22 +740,19 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
* ...
* 6.Receiver must use 16x over sampling
*/
- clrsetbits_be32(&uccp->gumr_l,
- UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
- UCC_SLOW_GUMR_L_RDCR_MASK,
- UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 |
- UCC_SLOW_GUMR_L_RDCR_16);
+ qe_clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 | UCC_SLOW_GUMR_L_RDCR_16);
- clrsetbits_be32(&uccp->gumr_h,
- UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
- UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX |
- UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);
+ qe_clrsetbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
+ UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);
#ifdef LOOPBACK
- clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
- UCC_SLOW_GUMR_L_DIAG_LOOP);
- clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP |
- UCC_SLOW_GUMR_H_CDS);
+ qe_clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
+ UCC_SLOW_GUMR_L_DIAG_LOOP);
+ qe_clrbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_CDS);
#endif
cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
@@ -801,7 +795,7 @@ static int qe_uart_startup(struct uart_port *port)
}
/* Startup rx-int */
- setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
+ qe_setbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX);
return 0;
@@ -837,7 +831,7 @@ static void qe_uart_shutdown(struct uart_port *port)
/* Stop uarts */
ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
- clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);
+ qe_clrbits_be16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);
/* Shut them really down and reinit buffer descriptors */
ucc_slow_graceful_stop_tx(qe_port->us_private);
@@ -857,9 +851,9 @@ static void qe_uart_set_termios(struct uart_port *port,
struct ucc_slow __iomem *uccp = qe_port->uccp;
unsigned int baud;
unsigned long flags;
- u16 upsmr = in_be16(&uccp->upsmr);
+ u16 upsmr = qe_ioread16be(&uccp->upsmr);
struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
- u16 supsmr = in_be16(&uccup->supsmr);
+ u16 supsmr = qe_ioread16be(&uccup->supsmr);
u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */
/* Character length programmed into the mode register is the
@@ -957,10 +951,10 @@ static void qe_uart_set_termios(struct uart_port *port,
/* Update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
- out_be16(&uccp->upsmr, upsmr);
+ qe_iowrite16be(upsmr, &uccp->upsmr);
if (soft_uart) {
- out_be16(&uccup->supsmr, supsmr);
- out_8(&uccup->rx_length, char_length);
+ qe_iowrite16be(supsmr, &uccup->supsmr);
+ qe_iowrite8(char_length, &uccup->rx_length);
/* Soft-UART requires a 1X multiplier for TX */
qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
--
2.23.0