[PATCH v3 9/9] ARM: at91/defconfig: enable config flags for sam9x60 SoC

From: Claudiu Beznea
Date: Fri Nov 29 2019 - 08:52:43 EST


Enable config flags for SAM9X60 SoC. This includes SoC flag
(CONFIG_SOC_SAM9X60) and IP/board specific flags as follows:
- atmel maxtouch
- flexcom
- XDMA
- I2S Multi-channel
- mikroelectronica proto board
- SAMA5D2's ADC
- atmel QSPI
- classd

Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
---
arch/arm/configs/at91_dt_defconfig | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 148f753de6c7..5c5df8bc0074 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -13,6 +13,7 @@ CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_AT91RM9200=y
CONFIG_SOC_AT91SAM9=y
+CONFIG_SOC_SAM9X60=y
# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
CONFIG_AEABI=y
CONFIG_UACCESS_WITH_MEMCPY=y
@@ -49,6 +50,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
@@ -99,6 +101,7 @@ CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
@@ -108,11 +111,14 @@ CONFIG_I2C_AT91=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -136,6 +142,9 @@ CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
CONFIG_SND_ATMEL_SOC_WM8904=y
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_ATMEL_SOC_CLASSD=y
+CONFIG_SND_SOC_MIKROE_PROTO=m
+CONFIG_SND_MCHP_SOC_I2S_MCC=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
@@ -167,9 +176,11 @@ CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
+CONFIG_AT_XDMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
+CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
--
2.7.4