[PATCH 1/3] media: atmel: atmel-isi: add support for mono sensors, GRAY and Y16

From: Eugen.Hristev
Date: Fri Nov 29 2019 - 09:10:45 EST


From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>

This adds support for GREY and Y16 formats, based on Y10 mbus codes.
Y16 needs to go through preview path in the ISI, with 2 pixels per word,
and it fits the Y16 format. The ISI data lines need to be MSB aligned with
the sensor data lines.
GREY format in 8 bits per pixel is done by dropping the 2 LSB bits
from the Y10 format, and packed as 4 pixels per word.

Suggested-by: Wenyou Yang <wenyou.yang@xxxxxxxxxxxxx>
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
drivers/media/platform/atmel/atmel-isi.c | 13 ++++++++++++-
drivers/media/platform/atmel/atmel-isi.h | 2 ++
2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
index 428f117..35c1f1a 100644
--- a/drivers/media/platform/atmel/atmel-isi.c
+++ b/drivers/media/platform/atmel/atmel-isi.c
@@ -148,7 +148,8 @@ static void configure_geometry(struct atmel_isi *isi)
u32 fourcc = isi->current_fmt->fourcc;

isi->enable_preview_path = fourcc == V4L2_PIX_FMT_RGB565 ||
- fourcc == V4L2_PIX_FMT_RGB32;
+ fourcc == V4L2_PIX_FMT_RGB32 ||
+ fourcc == V4L2_PIX_FMT_Y16;

/* According to sensor's output format to set cfg2 */
cfg2 = isi->current_fmt->swap;
@@ -990,6 +991,16 @@ static const struct isi_format isi_formats[] = {
.mbus_code = MEDIA_BUS_FMT_VYUY8_2X8,
.bpp = 2,
.swap = ISI_CFG2_YCC_SWAP_MODE_1,
+ }, {
+ .fourcc = V4L2_PIX_FMT_GREY,
+ .mbus_code = MEDIA_BUS_FMT_Y10_1X10,
+ .bpp = 1,
+ .swap = ISI_CFG2_GS_MODE_2_PIXEL | ISI_CFG2_GRAYSCALE,
+ }, {
+ .fourcc = V4L2_PIX_FMT_Y16,
+ .mbus_code = MEDIA_BUS_FMT_Y10_1X10,
+ .bpp = 2,
+ .swap = ISI_CFG2_GS_MODE_2_PIXEL | ISI_CFG2_GRAYSCALE,
},
};

diff --git a/drivers/media/platform/atmel/atmel-isi.h b/drivers/media/platform/atmel/atmel-isi.h
index 47a9108..7ad3895 100644
--- a/drivers/media/platform/atmel/atmel-isi.h
+++ b/drivers/media/platform/atmel/atmel-isi.h
@@ -62,6 +62,8 @@
#define ISI_CFG1_THMASK_BEATS_16 (2 << 13)

/* Bitfields in CFG2 */
+#define ISI_CFG2_GS_MODE_2_PIXEL (0 << 11)
+#define ISI_CFG2_GS_MODE_1_PIXEL (1 << 11)
#define ISI_CFG2_GRAYSCALE (1 << 13)
#define ISI_CFG2_COL_SPACE_YCbCr (0 << 15)
#define ISI_CFG2_COL_SPACE_RGB (1 << 15)
--
2.7.4