[PATCH v2 2/3] KVM: X86: Use APIC_DEST_* macros properly

From: Peter Xu
Date: Fri Nov 29 2019 - 11:32:51 EST


Previously we were using either APIC_DEST_PHYSICAL|APIC_DEST_LOGICAL
or 0|1 to fill in kvm_lapic_irq.dest_mode, and it's done in an adhoc
way. It's fine imho only because in most cases when we check against
dest_mode it's against APIC_DEST_PHYSICAL (which equals to 0).
However, that's not consistent, majorly because APIC_DEST_LOGICAL does
not equals to 1, so if one day we check irq.dest_mode against
APIC_DEST_LOGICAL we'll probably always get a false returned.

This patch replaces the 0/1 settings of irq.dest_mode with the macros
to make them consistent.

Signed-off-by: Peter Xu <peterx@xxxxxxxxxx>
---
arch/x86/kvm/ioapic.c | 9 ++++++---
arch/x86/kvm/irq_comm.c | 7 ++++---
arch/x86/kvm/x86.c | 2 +-
3 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index 9fd2dd89a1c5..1e091637d5d5 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -331,7 +331,8 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
irq.vector = e->fields.vector;
irq.delivery_mode = e->fields.delivery_mode << 8;
irq.dest_id = e->fields.dest_id;
- irq.dest_mode = e->fields.dest_mode;
+ irq.dest_mode = e->fields.dest_mode ?
+ APIC_DEST_LOGICAL : APIC_DEST_PHYSICAL;
bitmap_zero(&vcpu_bitmap, 16);
kvm_bitmap_or_dest_vcpus(ioapic->kvm, &irq,
&vcpu_bitmap);
@@ -343,7 +344,8 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
* keep ioapic_handled_vectors synchronized.
*/
irq.dest_id = old_dest_id;
- irq.dest_mode = old_dest_mode;
+ irq.dest_mode = old_dest_mode ?
+ APIC_DEST_LOGICAL : APIC_DEST_PHYSICAL;
kvm_bitmap_or_dest_vcpus(ioapic->kvm, &irq,
&vcpu_bitmap);
}
@@ -369,7 +371,8 @@ static int ioapic_service(struct kvm_ioapic *ioapic, int irq, bool line_status)

irqe.dest_id = entry->fields.dest_id;
irqe.vector = entry->fields.vector;
- irqe.dest_mode = entry->fields.dest_mode;
+ irqe.dest_mode = entry->fields.dest_mode ?
+ APIC_DEST_LOGICAL : APIC_DEST_PHYSICAL;
irqe.trig_mode = entry->fields.trig_mode;
irqe.delivery_mode = entry->fields.delivery_mode << 8;
irqe.level = 1;
diff --git a/arch/x86/kvm/irq_comm.c b/arch/x86/kvm/irq_comm.c
index 8ecd48d31800..673b6afd6dbf 100644
--- a/arch/x86/kvm/irq_comm.c
+++ b/arch/x86/kvm/irq_comm.c
@@ -52,8 +52,8 @@ int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
unsigned long dest_vcpu_bitmap[BITS_TO_LONGS(KVM_MAX_VCPUS)];
unsigned int dest_vcpus = 0;

- if (irq->dest_mode == 0 && irq->dest_id == 0xff &&
- kvm_lowest_prio_delivery(irq)) {
+ if (irq->dest_mode == APIC_DEST_PHYSICAL &&
+ irq->dest_id == 0xff && kvm_lowest_prio_delivery(irq)) {
printk(KERN_INFO "kvm: apic: phys broadcast and lowest prio\n");
irq->delivery_mode = APIC_DM_FIXED;
}
@@ -114,7 +114,8 @@ void kvm_set_msi_irq(struct kvm *kvm, struct kvm_kernel_irq_routing_entry *e,
irq->dest_id |= MSI_ADDR_EXT_DEST_ID(e->msi.address_hi);
irq->vector = (e->msi.data &
MSI_DATA_VECTOR_MASK) >> MSI_DATA_VECTOR_SHIFT;
- irq->dest_mode = (1 << MSI_ADDR_DEST_MODE_SHIFT) & e->msi.address_lo;
+ irq->dest_mode = (1 << MSI_ADDR_DEST_MODE_SHIFT) & e->msi.address_lo ?
+ APIC_DEST_LOGICAL : APIC_DEST_PHYSICAL;
irq->trig_mode = (1 << MSI_DATA_TRIGGER_SHIFT) & e->msi.data;
irq->delivery_mode = e->msi.data & 0x700;
irq->msi_redir_hint = ((e->msi.address_lo
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3ed167e039e5..3b00d662dc14 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7356,7 +7356,7 @@ static void kvm_pv_kick_cpu_op(struct kvm *kvm, unsigned long flags, int apicid)
struct kvm_lapic_irq lapic_irq;

lapic_irq.shorthand = 0;
- lapic_irq.dest_mode = 0;
+ lapic_irq.dest_mode = APIC_DEST_PHYSICAL;
lapic_irq.level = 0;
lapic_irq.dest_id = apicid;
lapic_irq.msi_redir_hint = false;
--
2.21.0