[PATCH v3 3/6] mfd: rn5t618: add irq support

[Andreas Kemnade]

This adds support for irq handling in the rc5t619 which is required
for properly implementing subdevices like rtc.
For now only definitions for the variant rc5t619 are included.

Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
Changes in v3:
alignment cleanup

Changes in v2:
- no dead code, did some more testing and thinking for that
- remove extra empty lines

 drivers/mfd/Kconfig         |  1 +
 drivers/mfd/Makefile        |  2 +-
 drivers/mfd/rn5t618-core.c  | 34 ++++++++++++++-
 drivers/mfd/rn5t618-irq.c   | 85 +++++++++++++++++++++++++++++++++++++
 include/linux/mfd/rn5t618.h | 16 +++++++
 5 files changed, 136 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mfd/rn5t618-irq.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ae24d3ea68ea..522e068d0082 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1057,6 +1057,7 @@ config MFD_RN5T618
 	depends on OF
 	select MFD_CORE
 	select REGMAP_I2C
+	select REGMAP_IRQ
 	help
 	  Say yes here to add support for the Ricoh RN5T567,
 	  RN5T618, RC5T619 PMIC.
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 110ea700231b..2906d5db67d0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -217,7 +217,7 @@ obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_RK808)		+= rk808.o
 
-rn5t618-objs			:= rn5t618-core.o
+rn5t618-objs			:= rn5t618-core.o rn5t618-irq.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
diff --git a/drivers/mfd/rn5t618-core.c b/drivers/mfd/rn5t618-core.c
index da5cd9c92a59..1e2326217681 100644
--- a/drivers/mfd/rn5t618-core.c
+++ b/drivers/mfd/rn5t618-core.c
@@ -8,6 +8,7 @@
 
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/rn5t618.h>
 #include <linux/module.h>
@@ -105,7 +106,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, priv);
 	priv->variant = (long)of_id->data;
-
+	priv->chip_irq = i2c->irq;
+	priv->dev = &i2c->dev;
 	priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
 	if (IS_ERR(priv->regmap)) {
 		ret = PTR_ERR(priv->regmap);
@@ -137,6 +139,11 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	if (priv->chip_irq > 0) {
+		if (rn5t618_irq_init(priv))
+			priv->chip_irq = 0;
+	}
+
 	return 0;
 }
 
@@ -154,15 +161,40 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
+static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
+{
+	struct rn5t618 *priv = dev_get_drvdata(dev);
+
+	if (priv->chip_irq)
+		disable_irq(priv->chip_irq);
+
+	return 0;
+}
+
+static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
+{
+	struct rn5t618 *priv = dev_get_drvdata(dev);
+
+	if (priv->chip_irq)
+		enable_irq(priv->chip_irq);
+
+	return 0;
+}
+
 static const struct i2c_device_id rn5t618_i2c_id[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
 
+static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
+			rn5t618_i2c_suspend,
+			rn5t618_i2c_resume);
+
 static struct i2c_driver rn5t618_i2c_driver = {
 	.driver = {
 		.name = "rn5t618",
 		.of_match_table = of_match_ptr(rn5t618_of_match),
+		.pm = &rn5t618_i2c_dev_pm_ops,
 	},
 	.probe = rn5t618_i2c_probe,
 	.remove = rn5t618_i2c_remove,
diff --git a/drivers/mfd/rn5t618-irq.c b/drivers/mfd/rn5t618-irq.c
new file mode 100644
index 000000000000..8a4c56429768
--- /dev/null
+++ b/drivers/mfd/rn5t618-irq.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Andreas Kemnade
+ */
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/rn5t618.h>
+
+static const struct regmap_irq rc5t619_irqs[] = {
+	[RN5T618_IRQ_SYS] = {
+		.reg_offset = 0,
+		.mask = (0 << 1)
+	},
+	[RN5T618_IRQ_DCDC] = {
+		.reg_offset = 0,
+		.mask = (1 << 1)
+	},
+	[RN5T618_IRQ_RTC]  = {
+		.reg_offset = 0,
+		.mask = (1 << 2)
+	},
+	[RN5T618_IRQ_ADC] = {
+		.reg_offset = 0,
+		.mask = (1 << 3)
+	},
+	[RN5T618_IRQ_GPIO] = {
+		.reg_offset = 0,
+		.mask = (1 << 4)
+	},
+	[RN5T618_IRQ_CHG] = {
+		.reg_offset = 0,
+		.mask = (1 << 6),
+	}
+};
+
+static const struct regmap_irq_chip rc5t619_irq_chip = {
+	.name = "rc5t619",
+	.irqs = rc5t619_irqs,
+	.num_irqs = ARRAY_SIZE(rc5t619_irqs),
+	.num_regs = 1,
+	.status_base = RN5T618_INTMON,
+	.mask_base = RN5T618_INTEN,
+	.mask_invert = true,
+};
+
+int rn5t618_irq_init(struct rn5t618 *rn5t618)
+{
+	const struct regmap_irq_chip *irq_chip;
+	int ret;
+
+	if (!rn5t618->chip_irq)
+		return 0;
+
+	switch (rn5t618->variant) {
+	case RC5T619:
+		irq_chip = &rc5t619_irq_chip;
+		break;
+
+		/* TODO: check irq definitions for other variants */
+
+	default:
+		irq_chip = NULL;
+		break;
+	}
+
+	if (!irq_chip) {
+		dev_err(rn5t618->dev, "no IRQ definition known for variant\n");
+		return -ENOENT;
+	}
+
+	ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
+				       rn5t618->chip_irq,
+				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				       0, irq_chip, &rn5t618->irq_data);
+	if (ret != 0) {
+		dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index d62ef48060b5..edd2b6485e3b 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -242,9 +242,25 @@ enum {
 	RC5T619,
 };
 
+/* RN5T618 IRQ definitions */
+enum {
+	RN5T618_IRQ_SYS,
+	RN5T618_IRQ_DCDC,
+	RN5T618_IRQ_RTC,
+	RN5T618_IRQ_ADC,
+	RN5T618_IRQ_GPIO,
+	RN5T618_IRQ_CHG,
+	RN5T618_NR_IRQS,
+};
+
 struct rn5t618 {
 	struct regmap *regmap;
+	struct device *dev;
 	long variant;
+
+	int chip_irq;
+	struct regmap_irq_chip_data *irq_data;
 };
 
+extern int rn5t618_irq_init(struct rn5t618 *rn5t618);
 #endif /* __LINUX_MFD_RN5T618_H */
-- 
2.20.1