Re: [PATCH 1/1] hwmon: Driver for temperature sensors on SATA drives

[Randy Dunlap]

Hi,

On 12/8/19 9:21 PM, Guenter Roeck wrote:
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 13a6b4afb4b3..4c63eb7ba96a 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1346,6 +1346,16 @@ config SENSORS_RASPBERRYPI_HWMON
>  	  This driver can also be built as a module. If so, the module
>  	  will be called raspberrypi-hwmon.
>  
> +config SENSORS_SATATEMP
> +	tristate "SATA hard disk drives with temperature sensors"
> +	depends on SCSI && ATA
> +	help
> +	  If you say yes you get support for the temperature sensor on
> +	  SATA hard disk drives.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called smarttemp.

Makefile seems to say satatemp.

> +
>  config SENSORS_SHT15
>  	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
>  	depends on GPIOLIB || COMPILE_TEST
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 40c036ea45e6..fe55b8f76af9 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -148,6 +148,7 @@ obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
>  obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
>  obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
>  obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
> +obj-$(CONFIG_SENSORS_SATATEMP)	+= satatemp.o
>  obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
>  obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
>  obj-$(CONFIG_SENSORS_SHT3x)	+= sht3x.o


-- 
~Randy