Re: [PATCH 1/1] hwmon: Driver for temperature sensors on SATA drives

[Guenter Roeck]

On 12/8/19 9:28 PM, Randy Dunlap wrote:
> Hi,
>
> On 12/8/19 9:21 PM, Guenter Roeck wrote:
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 13a6b4afb4b3..4c63eb7ba96a 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1346,6 +1346,16 @@ config SENSORS_RASPBERRYPI_HWMON
> >   	  This driver can also be built as a module. If so, the module
> >   	  will be called raspberrypi-hwmon.
> >   
> > +config SENSORS_SATATEMP
> > +	tristate "SATA hard disk drives with temperature sensors"
> > +	depends on SCSI && ATA
> > +	help
> > +	  If you say yes you get support for the temperature sensor on
> > +	  SATA hard disk drives.
> > +
> > +	  This driver can also be built as a module. If so, the module
> > +	  will be called smarttemp.
>
> Makefile seems to say satatemp.

Oops. Thanks for the note. Will fix.

Guenter

> > +
> >   config SENSORS_SHT15
> >   	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
> >   	depends on GPIOLIB || COMPILE_TEST
> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> > index 40c036ea45e6..fe55b8f76af9 100644
> > --- a/drivers/hwmon/Makefile
> > +++ b/drivers/hwmon/Makefile
> > @@ -148,6 +148,7 @@ obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
> >   obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
> >   obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
> >   obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
> > +obj-$(CONFIG_SENSORS_SATATEMP)	+= satatemp.o
> >   obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
> >   obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
> >   obj-$(CONFIG_SENSORS_SHT3x)	+= sht3x.o