[PATCH RFC 3/8] dt-bindings: display: add Unisoc's dpu bindings

[Kevin Tang]

From: Kevin Tang <kevin.tang@xxxxxxxxxx>

DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
which transfers the image data from a video memory buffer to an internal
LCD interface.

Cc: Orson Zhai <orsonzhai@xxxxxxxxx>
Cc: Baolin Wang <baolin.wang@xxxxxxxxxx>
Cc: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
Signed-off-by: Kevin Tang <kevin.tang@xxxxxxxxxx>
---
 .../devicetree/bindings/display/sprd/dpu.txt       | 55 ++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/sprd/dpu.txt

diff --git a/Documentation/devicetree/bindings/display/sprd/dpu.txt b/Documentation/devicetree/bindings/display/sprd/dpu.txt
new file mode 100644
index 0000000..25cbf8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/dpu.txt
@@ -0,0 +1,55 @@
+Unisoc SoC Display Processor Unit (DPU)
+============================================================================
+
+DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
+which transfers the image data from a video memory buffer to an internal
+LCD interface.
+
+Required properties:
+  - compatible: value should be "sprd,display-processor";
+  - reg: physical base address and length of the DPU registers set.
+  - interrupts: the interrupt signal from DPU.
+  - clocks: must include clock specifiers corresponding to entries in the
+	    clock-names property.
+  - clock-names: list of clock names sorted in the same order as the clocks
+                 property.
+  - dma-coherent: with this property, the dpu driver can allocate large and
+		  continuous memorys.
+  - port: a port node with endpoint definitions as defined in document [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Optional Properties:
+  - iommus: a phandle to DPU iommu node.
+  - power-domains: a phandle to DPU power domain node.
+
+
+Example:
+
+SoC specific DT entry:
+
+	dpu: dpu@63000000 {
+		compatible = "sprd,display-processor";
+		reg = <0x0 0x63000000 0x0 0x1000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "clk_src_128m",
+			"clk_src_153m6",
+			"clk_src_384m",
+			"clk_dpu_core",
+			"clk_dpu_dpi",
+			"clk_aon_apb_disp_eb";
+
+		clocks = <&clk_twpll_128m>,
+			<&clk_twpll_153m6>,
+			<&clk_twpll_384m>,
+			<&clk_dpu>,
+			<&clk_dpu_dpi>,
+			<&clk_aon_top_gates 2>;
+
+		dma-coherent;
+		dpu_port: port {
+			dpu_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+			};
+		};
+	};
\ No newline at end of file
-- 
2.7.4