Re: [PATCHv3 02/15] remoteproc/omap: Add device tree support
From: Suman Anna
Date: Thu Dec 19 2019 - 21:08:21 EST
Hi Tero, Mathieu,
On 12/19/19 5:54 AM, Tero Kristo wrote:
> On 18/12/2019 01:01, Mathieu Poirier wrote:
>> Hi Tero,
>>
>> On Fri, Dec 13, 2019 at 02:55:24PM +0200, Tero Kristo wrote:
>>> From: Suman Anna <s-anna@xxxxxx>
>>>
>>> OMAP4+ SoCs support device tree boot only. The OMAP remoteproc
>>> driver is enhanced to support remoteproc devices created through
>>> Device Tree, support for legacy platform devices has been
>>> deprecated. The current DT support handles the IPU and DSP
>>> processor subsystems on OMAP4 and OMAP5 SoCs.
>>>
>>> The OMAP remoteproc driver relies on the ti-sysc, reset, and
>>> syscon layers for performing clock, reset and boot vector
>>> management (DSP remoteprocs only) of the devices, but some of
>>> these are limited only to the machine-specific layers
>>> in arch/arm. The dependency against control module API for boot
>>> vector management of the DSP remoteprocs has now been removed
>>> with added logic to parse the boot register from the DT node
>>> and program it appropriately directly within the driver.
>>>
>>> The OMAP remoteproc driver expects the firmware names to be
>>> provided via device tree entries (firmware-name.) These are used
>>> to load the proper firmware during boot of the remote processor.
>>>
>>> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
>>> Signed-off-by: Suman Anna <s-anna@xxxxxx>
>>> [t-kristo@xxxxxx: converted to use ti-sysc framework]
>>> Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
>>> ---
>>> Â drivers/remoteproc/omap_remoteproc.c | 191 +++++++++++++++++++++++----
>>> Â 1 file changed, 168 insertions(+), 23 deletions(-)
>>>
>>> diff --git a/drivers/remoteproc/omap_remoteproc.c
>>> b/drivers/remoteproc/omap_remoteproc.c
>>> index 6398194075aa..558634624590 100644
>>> --- a/drivers/remoteproc/omap_remoteproc.c
>>> +++ b/drivers/remoteproc/omap_remoteproc.c
>>> @@ -2,7 +2,7 @@
>>> Â /*
>>> ÂÂ * OMAP Remote Processor driver
>>> ÂÂ *
>>> - * Copyright (C) 2011 Texas Instruments, Inc.
>>> + * Copyright (C) 2011-2019 Texas Instruments Incorporated -
>>> http://www.ti.com/
>>> ÂÂ * Copyright (C) 2011 Google, Inc.
>>> ÂÂ *
>>> ÂÂ * Ohad Ben-Cohen <ohad@xxxxxxxxxx>
>>> @@ -16,27 +16,53 @@
>>> Â #include <linux/kernel.h>
>>> Â #include <linux/module.h>
>>> Â #include <linux/err.h>
>>> +#include <linux/of_device.h>
>>> Â #include <linux/platform_device.h>
>>> Â #include <linux/dma-mapping.h>
>>> Â #include <linux/remoteproc.h>
>>> Â #include <linux/mailbox_client.h>
>>> Â #include <linux/omap-mailbox.h>
>>> -
>>> -#include <linux/platform_data/remoteproc-omap.h>
>>> +#include <linux/regmap.h>
>>> +#include <linux/mfd/syscon.h>
>>> +#include <linux/reset.h>
>>> Â Â #include "omap_remoteproc.h"
>>> Â #include "remoteproc_internal.h"
>>> Â +/**
>>> + * struct omap_rproc_boot_data - boot data structure for the DSP
>>> omap rprocs
>>> + * @syscon: regmap handle for the system control configuration module
>>> + * @boot_reg: boot register offset within the @syscon regmap
>>> + */
>>> +struct omap_rproc_boot_data {
>>> +ÂÂÂ struct regmap *syscon;
>>> +ÂÂÂ unsigned int boot_reg;
>>> +};
>>> +
>>> Â /**
>>> ÂÂ * struct omap_rproc - omap remote processor state
>>> ÂÂ * @mbox: mailbox channel handle
>>> ÂÂ * @client: mailbox client to request the mailbox channel
>>> + * @boot_data: boot data structure for setting processor boot address
>>> ÂÂ * @rproc: rproc handle
>>> + * @reset: reset handle
>>> ÂÂ */
>>> Â struct omap_rproc {
>>> ÂÂÂÂÂ struct mbox_chan *mbox;
>>> ÂÂÂÂÂ struct mbox_client client;
>>> +ÂÂÂ struct omap_rproc_boot_data *boot_data;
>>> ÂÂÂÂÂ struct rproc *rproc;
>>> +ÂÂÂ struct reset_control *reset;
>>> +};
>>> +
>>> +/**
>>> + * struct omap_rproc_dev_data - device data for the omap remote
>>> processor
>>> + * @device_name: device name of the remote processor
>>> + * @has_bootreg: true if this remote processor has boot register
>>> + */
>>> +struct omap_rproc_dev_data {
>>> +ÂÂÂ const char *device_name;
>>> +ÂÂÂ bool has_bootreg;
>>> Â };
>>> Â Â /**
>>> @@ -92,6 +118,21 @@ static void omap_rproc_kick(struct rproc *rproc,
>>> int vqid)
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂ ret);
>>> Â }
>>> Â +/**
>>> + * omap_rproc_write_dsp_boot_addr - set boot address for a DSP
>>> remote processor
>>> + * @rproc: handle of a remote processor
>>> + *
>>> + * Set boot address for a supported DSP remote processor.
>>> + */
>>> +static void omap_rproc_write_dsp_boot_addr(struct rproc *rproc)
>>> +{
>>> +ÂÂÂ struct omap_rproc *oproc = rproc->priv;
>>> +ÂÂÂ struct omap_rproc_boot_data *bdata = oproc->boot_data;
>>> +ÂÂÂ u32 offset = bdata->boot_reg;
>>> +
>>> +ÂÂÂ regmap_write(bdata->syscon, offset, rproc->bootaddr);
>>> +}
>>> +
>>> Â /*
>>> ÂÂ * Power up the remote processor.
>>> ÂÂ *
>>> @@ -103,13 +144,11 @@ static int omap_rproc_start(struct rproc *rproc)
>>> Â {
>>> ÂÂÂÂÂ struct omap_rproc *oproc = rproc->priv;
>>> ÂÂÂÂÂ struct device *dev = rproc->dev.parent;
>>> -ÂÂÂ struct platform_device *pdev = to_platform_device(dev);
>>> -ÂÂÂ struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
>>> ÂÂÂÂÂ int ret;
>>> ÂÂÂÂÂ struct mbox_client *client = &oproc->client;
>>> Â -ÂÂÂ if (pdata->set_bootaddr)
>>> -ÂÂÂÂÂÂÂ pdata->set_bootaddr(rproc->bootaddr);
>>> +ÂÂÂ if (oproc->boot_data)
>>> +ÂÂÂÂÂÂÂ omap_rproc_write_dsp_boot_addr(rproc);
>>> Â ÂÂÂÂÂ client->dev = dev;
>>> ÂÂÂÂÂ client->tx_done = NULL;
>>> @@ -117,7 +156,7 @@ static int omap_rproc_start(struct rproc *rproc)
>>> ÂÂÂÂÂ client->tx_block = false;
>>> ÂÂÂÂÂ client->knows_txdone = false;
>>> Â -ÂÂÂ oproc->mbox = omap_mbox_request_channel(client,
>>> pdata->mbox_name);
>>> +ÂÂÂ oproc->mbox = mbox_request_channel(client, 0);
>>> ÂÂÂÂÂ if (IS_ERR(oproc->mbox)) {
>>> ÂÂÂÂÂÂÂÂÂ ret = -EBUSY;
>>> ÂÂÂÂÂÂÂÂÂ dev_err(dev, "mbox_request_channel failed: %ld\n",
>>> @@ -138,11 +177,7 @@ static int omap_rproc_start(struct rproc *rproc)
>>> ÂÂÂÂÂÂÂÂÂ goto put_mbox;
>>> ÂÂÂÂÂ }
>>> Â -ÂÂÂ ret = pdata->device_enable(pdev);
>>> -ÂÂÂ if (ret) {
>>> -ÂÂÂÂÂÂÂ dev_err(dev, "omap_device_enable failed: %d\n", ret);
>>> -ÂÂÂÂÂÂÂ goto put_mbox;
>>> -ÂÂÂ }
>>> +ÂÂÂ reset_control_deassert(oproc->reset);
>>> Â ÂÂÂÂÂ return 0;
>>> Â @@ -154,15 +189,9 @@ static int omap_rproc_start(struct rproc *rproc)
>>> Â /* power off the remote processor */
>>> Â static int omap_rproc_stop(struct rproc *rproc)
>>> Â {
>>> -ÂÂÂ struct device *dev = rproc->dev.parent;
>>> -ÂÂÂ struct platform_device *pdev = to_platform_device(dev);
>>> -ÂÂÂ struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
>>> ÂÂÂÂÂ struct omap_rproc *oproc = rproc->priv;
>>> -ÂÂÂ int ret;
>>> Â -ÂÂÂ ret = pdata->device_shutdown(pdev);
>>> -ÂÂÂ if (ret)
>>> -ÂÂÂÂÂÂÂ return ret;
>>> +ÂÂÂ reset_control_assert(oproc->reset);
Any reasons for dropping the checks for the return status and wherever
you replaced the pdata callbacks with the desired reset API?
>>> Â ÂÂÂÂÂ mbox_free_channel(oproc->mbox);
>>> Â @@ -175,12 +204,122 @@ static const struct rproc_ops omap_rproc_ops
>>> = {
>>> ÂÂÂÂÂ .kickÂÂÂÂÂÂÂ = omap_rproc_kick,
>>> Â };
>>> Â +static const struct omap_rproc_dev_data omap4_dsp_dev_data = {
>>> +ÂÂÂ .device_nameÂÂÂ = "dsp",
>>> +ÂÂÂ .has_bootregÂÂÂ = true,
>>> +};
>>> +
>>> +static const struct omap_rproc_dev_data omap4_ipu_dev_data = {
>>> +ÂÂÂ .device_nameÂÂÂ = "ipu",
>>> +};
>>> +
>>> +static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
>>> +ÂÂÂ .device_nameÂÂÂ = "dsp",
>>> +ÂÂÂ .has_bootregÂÂÂ = true,
>>> +};
>>> +
>>> +static const struct omap_rproc_dev_data omap5_ipu_dev_data = {
>>> +ÂÂÂ .device_nameÂÂÂ = "ipu",
>>> +};
>>> +
>>> +static const struct of_device_id omap_rproc_of_match[] = {
>>> +ÂÂÂ {
>>> +ÂÂÂÂÂÂÂ .compatibleÂÂÂÂ = "ti,omap4-dsp",
>>> +ÂÂÂÂÂÂÂ .dataÂÂÂÂÂÂÂÂÂÂ = &omap4_dsp_dev_data,
>>> +ÂÂÂ },
>>> +ÂÂÂ {
>>> +ÂÂÂÂÂÂÂ .compatibleÂÂÂÂ = "ti,omap4-ipu",
>>> +ÂÂÂÂÂÂÂ .dataÂÂÂÂÂÂÂÂÂÂ = &omap4_ipu_dev_data,
>>> +ÂÂÂ },
>>> +ÂÂÂ {
>>> +ÂÂÂÂÂÂÂ .compatibleÂÂÂÂ = "ti,omap5-dsp",
>>> +ÂÂÂÂÂÂÂ .dataÂÂÂÂÂÂÂÂÂÂ = &omap5_dsp_dev_data,
>>> +ÂÂÂ },
>>> +ÂÂÂ {
>>> +ÂÂÂÂÂÂÂ .compatibleÂÂÂÂ = "ti,omap5-ipu",
>>> +ÂÂÂÂÂÂÂ .dataÂÂÂÂÂÂÂÂÂÂ = &omap5_ipu_dev_data,
>>> +ÂÂÂ },
>>> +ÂÂÂ {
>>> +ÂÂÂÂÂÂÂ /* end */
>>> +ÂÂÂ },
>>> +};
>>> +MODULE_DEVICE_TABLE(of, omap_rproc_of_match);
>>> +
>>> +static const char *omap_rproc_get_firmware(struct platform_device
>>> *pdev)
>>> +{
>>> +ÂÂÂ const char *fw_name;
>>> +ÂÂÂ int ret;
>>> +
>>> +ÂÂÂ ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
>>> +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ &fw_name);
>>> +ÂÂÂ if (ret)
>>> +ÂÂÂÂÂÂÂ return ERR_PTR(ret);
>>> +
>>> +ÂÂÂ return fw_name;
>>> +}
>>> +
>>> +static int omap_rproc_get_boot_data(struct platform_device *pdev,
>>> +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ struct rproc *rproc)
>>> +{
>>> +ÂÂÂ struct device_node *np = pdev->dev.of_node;
>>> +ÂÂÂ struct omap_rproc *oproc = rproc->priv;
>>> +ÂÂÂ const struct omap_rproc_dev_data *data;
>>> +ÂÂÂ int ret;
>>> +
>>> +ÂÂÂ data = of_device_get_match_data(&pdev->dev);
>>> +ÂÂÂ if (!data)
>>> +ÂÂÂÂÂÂÂ return -ENODEV;
>>> +
>>> +ÂÂÂ if (!data->has_bootreg)
>>> +ÂÂÂÂÂÂÂ return 0;
>>> +
>>> +ÂÂÂ oproc->boot_data = devm_kzalloc(&pdev->dev,
>>> sizeof(*oproc->boot_data),
>>> +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ GFP_KERNEL);
>>> +ÂÂÂ if (!oproc->boot_data)
>>> +ÂÂÂÂÂÂÂ return -ENOMEM;
>>> +
>>> +ÂÂÂ if (!of_property_read_bool(np, "ti,bootreg")) {
>>> +ÂÂÂÂÂÂÂ dev_err(&pdev->dev, "ti,bootreg property is missing\n");
>>> +ÂÂÂÂÂÂÂ return -EINVAL;
>>> +ÂÂÂ }
>>> +
>>> +ÂÂÂ oproc->boot_data->syscon =
>>> +ÂÂÂÂÂÂÂÂÂÂÂ syscon_regmap_lookup_by_phandle(np, "ti,bootreg");
>>> +ÂÂÂ if (IS_ERR(oproc->boot_data->syscon)) {
>>> +ÂÂÂÂÂÂÂ ret = PTR_ERR(oproc->boot_data->syscon);
>>> +ÂÂÂÂÂÂÂ return ret;
>>> +ÂÂÂ }
>>> +
>>> +ÂÂÂ if (of_property_read_u32_index(np, "ti,bootreg", 1,
>>> +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ &oproc->boot_data->boot_reg)) {
>>> +ÂÂÂÂÂÂÂ dev_err(&pdev->dev, "couldn't get the boot register\n");
>>> +ÂÂÂÂÂÂÂ return -EINVAL;
>>> +ÂÂÂ }
>>> +
>>> +ÂÂÂ return 0;
>>> +}
>>> +
>>> Â static int omap_rproc_probe(struct platform_device *pdev)
>>> Â {
>>> -ÂÂÂ struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
>>> +ÂÂÂ struct device_node *np = pdev->dev.of_node;
>>> ÂÂÂÂÂ struct omap_rproc *oproc;
>>> ÂÂÂÂÂ struct rproc *rproc;
>>> +ÂÂÂ const char *firmware;
>>> ÂÂÂÂÂ int ret;
>>> +ÂÂÂ struct reset_control *reset;
>>> +
>>> +ÂÂÂ if (!np) {
>>> +ÂÂÂÂÂÂÂ dev_err(&pdev->dev, "only DT-based devices are supported\n");
>>> +ÂÂÂÂÂÂÂ return -ENODEV;
>>> +ÂÂÂ }
>>> +
>>> +ÂÂÂ reset =
>>> devm_reset_control_array_get_optional_exclusive(&pdev->dev);
>>> +ÂÂÂ if (IS_ERR(reset))
>>> +ÂÂÂÂÂÂÂ return PTR_ERR(reset);
>>
>> Definition of a reset is listed as "required" in the bindings but here
>> it is
>> optional. If this is really what you want then adding a comment to
>> exlain your
>> choice is probably a good idea.
>
> Right, I think I updated the binding to require this but forgot to
> update the driver for this part. Will fix this.
>
> -Tero
>
>>
>>> +
>>> +ÂÂÂ firmware = omap_rproc_get_firmware(pdev);
>>> +ÂÂÂ if (IS_ERR(firmware))
>>> +ÂÂÂÂÂÂÂ return PTR_ERR(firmware);
>>> Â ÂÂÂÂÂ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
>>> ÂÂÂÂÂ if (ret) {
>>> @@ -188,16 +327,21 @@ static int omap_rproc_probe(struct
>>> platform_device *pdev)
>>> ÂÂÂÂÂÂÂÂÂ return ret;
>>> ÂÂÂÂÂ }
>>> Â -ÂÂÂ rproc = rproc_alloc(&pdev->dev, pdata->name, &omap_rproc_ops,
>>> -ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ pdata->firmware, sizeof(*oproc));
>>> +ÂÂÂ rproc = rproc_alloc(&pdev->dev, dev_name(&pdev->dev),
>>> &omap_rproc_ops,
>>> +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ firmware, sizeof(*oproc));
>>> ÂÂÂÂÂ if (!rproc)
>>> ÂÂÂÂÂÂÂÂÂ return -ENOMEM;
>>> Â ÂÂÂÂÂ oproc = rproc->priv;
>>> ÂÂÂÂÂ oproc->rproc = rproc;
>>> +ÂÂÂ oproc->reset = reset;
>>> ÂÂÂÂÂ /* All existing OMAP IPU and DSP processors have an MMU */
>>> ÂÂÂÂÂ rproc->has_iommu = true;
>>> Â +ÂÂÂ ret = omap_rproc_get_boot_data(pdev, rproc);
>>> +ÂÂÂ if (ret)
>>> +ÂÂÂÂÂÂÂ goto free_rproc;
>>> +
>>> ÂÂÂÂÂ platform_set_drvdata(pdev, rproc);
>>> Â ÂÂÂÂÂ ret = rproc_add(rproc);
>>> @@ -226,6 +370,7 @@ static struct platform_driver omap_rproc_driver = {
>>> ÂÂÂÂÂ .remove = omap_rproc_remove,
>>> ÂÂÂÂÂ .driver = {
>>> ÂÂÂÂÂÂÂÂÂ .name = "omap-rproc",
>>> +ÂÂÂÂÂÂÂ .of_match_table = omap_rproc_of_match,
>>
>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ .of_match_table = of_match_ptr(omap_rproc_of_match),
I had dropped this sometime back intentionally as all our platforms are
DT-only.
regards
Suman
>>
>> Thanks,
>> Mathieu
>>
>>> ÂÂÂÂÂ },
>>> Â };
>>> Â --Â
>>> 2.17.1
>>>
>>> --
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki