[PATCH 5/5] ARM: dts: mmp3-dell-ariel: Enable the HSIC

From: Lubomir Rintel
Date: Fri Dec 20 2019 - 01:53:37 EST


There's a SMSC USB2640 (USB hub & SD controller) connected to it, but
the SD card slot footprint is unpopulated. Also connected to the hub is
a SMSC LAN7500 gigabit ethernet adapter.

Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
arch/arm/boot/dts/mmp3-dell-ariel.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
index c1947b5a688d7..15449c72c042b 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -49,6 +49,28 @@ &usb_otg_phy0 {
status = "okay";
};

+&hsic0 {
+ status = "okay";
+
+ usb1@1 {
+ compatible = "usb424,2640";
+ reg = <0x01>;
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+
+ mass-storage@1 {
+ compatible = "usb424,4040";
+ reg = <0x01>;
+ status = "disabled";
+ };
+ };
+};
+
+&hsic_phy0 {
+ status = "okay";
+ reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+};
+
&mmc3 {
status = "okay";
max-frequency = <50000000>;
--
2.24.1