[PATCH 3/5] dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy

[Lubomir Rintel]

This is the PHY chip for USB HSIC on MMP3 platform.

Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
 .../bindings/phy/marvell,mmp3-hsic-phy.yaml   | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
new file mode 100644
index 0000000000000..7917a95cda78d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 Lubomir Rintel <lkundrak@xxxxx>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Marvell MMP3 HSIC PHY
+
+maintainers:
+  - Lubomir Rintel <lkundrak@xxxxx>
+
+properties:
+  compatible:
+    const: marvell,mmp3-hsic-phy
+
+  reg:
+    maxItems: 1
+    description: base address of the device
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to reset
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - "#phy-cells"
+
+examples:
+  - |
+    hsic-phy@f0001800 {
+            compatible = "marvell,mmp3-hsic-phy";
+            reg = <0xf0001800 0x40>;
+            reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+            #phy-cells = <0>;
+    };
-- 
2.24.1