Re: [PATCH v6 00/12] NVIDIA Tegra20 CPUFreq driver major update

From: Dmitry Osipenko
Date: Tue Jan 07 2020 - 18:17:07 EST


18.12.2019 23:21, Dmitry Osipenko ÐÐÑÐÑ:
> Hello,
>
> This series moves intermediate-clk handling from tegra20-cpufreq into
> tegra-clk driver. This allows us to switch to generic cpufreq-dt driver
> which brings voltage scaling, per-hardware OPPs and Tegra30 support out
> of the box. All boards need to adopt CPU OPPs in their device-trees in
> order to get cpufreq support.
>
> Changelog:
>
> v6: - Dropped "cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs"
> patch from the series since Viresh picked up that patch separately.
>
> - Added two new patches to this series:
>
> ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
> ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30
>
> Previously these patches were sent out separately from this series,
> but it should be more consistent to include them into the series since
> they directly relate to enabling of the cpufreq driver on Tegra30.
>
> v5: - The "Use generic cpufreq-dt driver (Tegra30 supported now)" patch
> is separated now into two patches by factoring out the blacklisting
> of cpufreq-dt-platdev into a standalone patch. This is done in a
> response to request from Jon Hunter to fix the warning splats during
> boot that are coming from OPP core because OPPs are unavailable. The
> OPPs will become available once tegra20-cpufreq driver will be updated
> to support the cpufreq-dt.
>
> v4: - Updated CCLK diagram in the "Add custom CCLK implementation" patch.
>
> - <linux/cpu.h> is now included in the "Use generic cpufreq-dt driver"
> patch, for consistency.
>
> - Returned value of get_cpu_device() is now checked in the "Use generic
> cpufreq-dt driver" patch, for consistency as well.
>
> v3: - The "Add custom CCLK implementation" patch was updated in accordance
> to the comments from Peter De Schrijver. We will not use the clock
> skipper.
>
> - Re added OPPs for T30 Beaver board because Thierry has that board ;)
>
> - Added r-b for the "DT binding" patch from Rob Herring.
>
> v2: - Kept modularity of the tegra20-cpufreq as was requested by Viresh Kumar
> in a review comment to v1.
>
> - Added acks from Viresh Kumar.
>
> - Added tested-by from Nicolas Chauvet to the "trimslice" patch.
> Nicolas told me on IRC that it works fine.
>
> - Fixed compilation of the "Add custom CCLK implementation" patch. The
> error happened because v1 was based on top of yet unreviewed/unapplied
> patch "clk: tegra: divider: Support enable-bit for Super clocks".
> Thanks to Peter Geis for reporting the problem.
>
> - Replaced Tegra30 "beaver" board with "cardhu-a04" because turned out
> that's what NVIDIA uses in the testing farm.
>
> Dmitry Osipenko (12):
> clk: tegra: Add custom CCLK implementation
> clk: tegra: pll: Add pre/post rate-change hooks
> clk: tegra: cclk: Add helpers for handling PLLX rate changes
> clk: tegra20: Use custom CCLK implementation
> clk: tegra30: Use custom CCLK implementation
> ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
> ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30
> dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
> cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported
> now)
> ARM: tegra: Create tegra20-cpufreq platform device on Tegra30
> ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS
> ARM: dts: tegra30: beaver: Add CPU Operating Performance Points
>
> .../cpufreq/nvidia,tegra20-cpufreq.txt | 56 +++++
> arch/arm/boot/dts/tegra30-beaver.dts | 40 +++-
> arch/arm/mach-tegra/sleep-tegra30.S | 18 +-
> arch/arm/mach-tegra/tegra.c | 4 +
> drivers/clk/tegra/Makefile | 1 +
> drivers/clk/tegra/clk-pll.c | 12 +-
> drivers/clk/tegra/clk-tegra-super-cclk.c | 212 +++++++++++++++++
> drivers/clk/tegra/clk-tegra20.c | 7 +-
> drivers/clk/tegra/clk-tegra30.c | 6 +-
> drivers/clk/tegra/clk.h | 19 +-
> drivers/cpufreq/Kconfig.arm | 6 +-
> drivers/cpufreq/tegra20-cpufreq.c | 217 +++++-------------
> 12 files changed, 418 insertions(+), 180 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> create mode 100644 drivers/clk/tegra/clk-tegra-super-cclk.c
>

Hello Peter,

Could you please take a look at the patches and ACK them if they are
okay to you?