Re: [PATCH v6 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 documentation

[Logan Shaw]

On Mon, 2020-01-27 at 09:48 -0600, Rob Herring wrote:
> On Mon, Jan 27, 2020 at 11:10:14AM +1300, Logan Shaw wrote:
> > Added a new file documenting the adt7475 devicetree and added the
> > four
> > new properties to it.
> > 
> > Signed-off-by: Logan Shaw <logan.shaw@xxxxxxxxxxxxxxxxxxx>
> > ---
> > ---
> >  .../devicetree/bindings/hwmon/adt7475.yaml    | 95
> > +++++++++++++++++++
> >  1 file changed, 95 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/hwmon/adt7475.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> > b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> > new file mode 100644
> > index 000000000000..450da5e66e07
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> > @@ -0,0 +1,95 @@
> > +# SPDX-License-Identifier: GPL-2.0
> 
> Dual license new bindings please:
> 
> (GPL-2.0-only OR BSD-2-Clause)
> 
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/adt7475.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ADT7475 hwmon sensor
> > +
> > +maintainers:
> > +  - Jean Delvare <jdelvare@xxxxxxxx>
> > +
> > +description: |
> > +  The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors
> > and multiple
> > +  PWN fan controllers.
> > +
> > +  They support monitoring and controlling up to four fans (the
> > ADT7490 can only
> > +  control up to three). They support reading a single on chip
> > temperature
> > +  sensor and two off chip temperature sensors (the ADT7490
> > additionally
> > +  supports measuring up to three current external temperature
> > sensors with
> > +  series resistance cancellation (SRC)).
> > +
> > +  Datasheets:
> > +  https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
> > +  https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
> > +  https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
> > +  https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
> > +
> > +  Description taken from omsemiconductors specification sheets,
> > with minor
> 
> omsemi?
>  ^
> 
> > +  rephrasing.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,adt7473
> > +      - adi,adt7475
> > +      - adi,adt7476
> > +      - adi,adt7490
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  bypass-attenuator-in0:
> 
> Needs a vendor prefix and a type ref. 
> 
> > +    description: |
> > +      Configures bypassing the individual voltage input
> > +      attenuator, on in0. This is supported on the ADT7476 and
> > ADT7490.
> > +      If set to a non-zero integer the attenuator is bypassed, if
> > set to
> > +      zero the attenuator is not bypassed. If the property is
> > absent then
> > +      the config register is not modified.
> 
> Sounds like this could be boolean? If not, define a schema for what
> are 
> valid values.

By boolean are you referring to a dts property that is evaluated (using
function of_property_read_bool) as true/false, depending on its
presence? For example "regulator-always-on" in:
/Documentation/devicetree/bindings/regulator/regulator.yaml .

> 
> > +    maxItems: 1
> > +
> > +  bypass-attenuator-in1:
> > +    description: |
> > +      Configures bypassing the individual voltage input
> > +      attenuator, on in1. This is supported on the ADT7473,
> > ADT7475,
> > +      ADT7476 and ADT7490. If set to a non-zero integer the
> > attenuator
> > +      is bypassed, if set to zero the attenuator is not bypassed.
> > If the
> > +      property is absent then the config register is not modified.
> > +    maxItems: 1
> > +
> > +  bypass-attenuator-in3:
> > +    description: |
> > +      Configures bypassing the individual voltage input
> > +      attenuator, on in3. This is supported on the ADT7476 and
> > ADT7490.
> > +      If set to a non-zero integer the attenuator is bypassed, if
> > set to
> > +      zero the attenuator is not bypassed. If the property is
> > absent then
> > +      the config register is not modified.
> > +    maxItems: 1
> > +
> > +  bypass-attenuator-in4:
> 
> These 4 could be a single entry under patternProperties.
> 
> 
> > +    description: |
> > +      Configures bypassing the individual voltage input
> > +      attenuator, on in4. This is supported on the ADT7476 and
> > ADT7490.
> > +      If set to a non-zero integer the attenuator is bypassed, if
> > set to
> > +      zero the attenuator is not bypassed. If the property is
> > absent then
> > +      the config register is not modified.
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      hwmon@2e {
> > +        compatible = "adi,adt7476";
> > +        reg = <0x2e>;
> > +        bypass-attenuator-in0 = <1>;
> > +        bypass-attenuator-in1 = <0>;
> > +      };
> > +    };
> > +...
> > -- 
> > 2.25.0
> >