[PATCH] RISC-V: Don't enable all interrupts in trap_init()

[Anup Patel]

Historically, we have been enabling all interrupts for each
HART in trap_init(). Ideally, we should only enable M-mode
interrupts for M-mode kernel and S-mode interrupts for S-mode
kernel in trap_init().

Currently, we get suprious S-mode interrupts on Kendryte K210
board running M-mode NO-MMU kernel because we are enabling all
interrupts in trap_init(). To fix this, we only enable software
and external interrupt in trap_init(). In future, trap_init()
will only enable software interrupt and PLIC driver will enable
external interrupt using CPU notifiers.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code)
Signed-off-by: Anup Patel <anup.patel@xxxxxxx>
---
 arch/riscv/kernel/traps.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index f4cad5163bf2..ffb3d94bf0cc 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -156,6 +156,6 @@ void __init trap_init(void)
 	csr_write(CSR_SCRATCH, 0);
 	/* Set the exception vector address */
 	csr_write(CSR_TVEC, &handle_exception);
-	/* Enable all interrupts */
-	csr_write(CSR_IE, -1);
+	/* Enable interrupts */
+	csr_write(CSR_IE, IE_SIE | IE_EIE);
 }
-- 
2.17.1