[PATCH v2 2/2] ARM: DTS: Add devicetree file for the Galaxy S2

From: Paul Cercueil
Date: Wed Mar 18 2020 - 18:25:23 EST

From: Stenkin Evgeniy <stenkinevgeniy@xxxxxxxxx>

Add devicetree file for the Exynos 4210 based Galaxy S2 (i9100 version).

Signed-off-by: Stenkin Evgeniy <stenkinevgeniy@xxxxxxxxx>
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---

Notes:
v2: - Change i9100 to GT-I9100
- Remove redundant description in header
- Add chosen node with stdout-path
- Rename regulator nodes since there was no regulator-2
- Rename i2c-gpio-3 to i2c-gpio
- Use IRQ_TYPE_EDGE_FALLING instead of hardcoded '2'
- Remove spi-cpol, spi-cpha as they glitch the LCD panel
- Make CS gpio active-low
- Update ehci node to add 'phys' instead of ports
- Remove duplicated ehci node
- Reorder nodes to appear in alphabetical order
- Remove useless newlines
- Remove regulator provided to touchscreen node since it does not expect any

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos4210-i9100.dts | 773 +++++++++++++++++++++++++
2 files changed, 774 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos4210-i9100.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2676b9..522436d30690 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-monk.dtb \
exynos3250-rinato.dtb
dtb-$(CONFIG_ARCH_EXYNOS4) += \
+ exynos4210-i9100.dtb \
exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
new file mode 100644
index 000000000000..7e476871c178
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -0,0 +1,773 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@xxxxxxxxx>
+ * Copyright (c) 2020 Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ model = "Samsung Galaxy S2 (GT-I9100)";
+ compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ vemmc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ tsp_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "TSP_FIXED_VOLTAGES";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ cam_af_28v_reg: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "8M_AF_2.8V_EN";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ cam_io_en_reg: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_IO_EN";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ cam_io_12v_reg: regulator-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "8M_1.2V_EN";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vt_core_15v_reg: regulator-5 {
+ compatible = "regulator-fixed";
+ regulator-name = "VT_CORE_1.5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ vol-down {
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume down";
+ debounce-interval = <10>;
+ };
+
+ vol-up {
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume up";
+ debounce-interval = <10>;
+ };
+
+ power {
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+
+ ok {
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_OK>;
+ label = "ok";
+ debounce-interval = <10>;
+ };
+ };
+
+ wlan_pwrseq: sdhci3-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ i2c_max17042_fuel: i2c-gpio {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpy4 0 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpy4 1 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <5>;
+
+ battery@36 {
+ compatible = "maxim,max17042";
+
+ interrupt-parent = <&gpx2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&max17042_fuel_irq>;
+ pinctrl-names = "default";
+
+ reg = <0x36>;
+ maxim,over-heat-temp = <700>;
+ maxim,over-volt = <4500>;
+ };
+ };
+
+ spi-lcd {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ num-chipselects = <1>;
+ cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
+ sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+
+ lcd@0 {
+ compatible = "samsung,ld9040";
+ reg = <0>;
+
+ spi-max-frequency = <1200000>;
+
+ vdd3-supply = <&vmipi_reg>;
+ vci-supply = <&vcclcd_reg>;
+
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+ power-on-delay = <10>;
+ reset-delay = <10>;
+
+ panel-width-mm = <90>;
+ panel-height-mm = <154>;
+
+ display-timings {
+ timing {
+ clock-frequency = <23492370>;
+ hactive = <480>;
+ vactive = <800>;
+ hback-porch = <16>;
+ hfront-porch = <16>;
+ vback-porch = <2>;
+ vfront-porch = <28>;
+ hsync-len = <2>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_dpi_ep>;
+ };
+ };
+ };
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz */
+ cooling-device = <&cpu0 2 2>;
+ };
+ map1 {
+ /* Corresponds to 200MHz */
+ cooling-device = <&cpu0 4 4>;
+ };
+ };
+ };
+ };
+};
+
+&camera {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu0-supply = <&varm_breg>;
+};
+
+&ehci {
+ status = "okay";
+
+ phys = <&exynos_usbphy 1>;
+ phy-names = "host";
+};
+
+&exynos_usbphy {
+ status = "okay";
+
+ vbus-supply = <&safe1_sreg>;
+};
+
+&fimc_0 {
+ status = "okay";
+
+ assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+ status = "okay";
+
+ assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+ status = "okay";
+
+ assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+ status = "okay";
+
+ assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ samsung,invert-vden;
+ samsung,invert-vclk;
+
+ pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+ pinctrl-names = "default";
+
+ port@3 {
+ reg = <3>;
+
+ fimd_dpi_ep: endpoint {
+ remote-endpoint = <&lcd_ep>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+
+ mali-supply = <&vg3d_breg>;
+ regulator-microvolt-offset = <50000>;
+ regulator-microsecs-delay = <50>;
+};
+
+&hsotg {
+ status = "okay";
+
+ dr_mode = "otg";
+ vusb_d-supply = <&vusb_reg>;
+ vusb_a-supply = <&vusbdac_reg>;
+};
+
+&i2c_3 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+
+ mxt224-touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+
+ pinctrl-0 = <&i2c5_bus>;
+ pinctrl-names = "default";
+
+ max8997_pmic@66 {
+ compatible = "maxim,max8997-pmic";
+ reg = <0x66>;
+
+ interrupts-extended = <&gpx0 7 0>, <&gpx2 3 2>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 IRQ_TYPE_NONE>;
+
+ otg_en-gpios = <&gpx3 3 0>;
+ usb_sel-gpios = <&gpl0 6 0>;
+
+ max8997,pmic-buck1-uses-gpio-dvs;
+ max8997,pmic-buck2-uses-gpio-dvs;
+ max8997,pmic-buck5-uses-gpio-dvs;
+
+ max8997,pmic-ignore-gpiodvs-side-effect;
+ max8997,pmic-buck125-default-dvs-idx = <0>;
+
+ max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+ <&gpx0 6 GPIO_ACTIVE_HIGH>,
+ <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+ max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+ <950000>, <900000>,
+ <1100000>, <1000000>,
+ <950000>, <900000>;
+
+ max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
+ pinctrl-names = "default";
+
+ regulators {
+ vadc_reg: LDO1 {
+ regulator-name = "VADC_3.3V_C210";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+
+ };
+ valive_reg: LDO2 {
+ regulator-name = "VALIVE_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+
+ };
+
+ vusb_reg: LDO3 {
+ regulator-name = "VUSB_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vmipi_reg: LDO4 {
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vhsic_reg: LDO5 {
+ regulator-name = "VHSIC_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vpda_reg: LDO6 {
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcam_reg: LDO7 {
+ regulator-name = "CAM_ISP_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vusbdac_reg: LDO8 {
+ regulator-name = "VUSB+VDAC_3.3V_C210";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vccpda_reg: LDO9 {
+ regulator-name = "VCC_2.8V_PDA";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ vtouch_reg: LDO11 {
+ regulator-name = "TOUCH_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ vpll_reg: LDO10 {
+ regulator-name = "VPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ vtcam_reg: LDO12 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcclcd_reg: LDO13 {
+ regulator-name = "VCC_3.0V_LCD";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vmotor_reg: LDO14 {
+ regulator-name = "VCC_2.8V_MOTOR";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vled_reg: LDO15 {
+ regulator-name = "LED_A_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ camsensor_reg: LDO16 {
+ regulator-name = "CAM_SENSOR_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vtf_reg: LDO17 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vtouchled_reg: LDO18 {
+ regulator-name = "TOUCH_LED_3.3V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddq_reg: LDO21 {
+ regulator-name = "VDDQ_M1M2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ varm_breg: BUCK1 {
+ //regulator-name = "VARM_1.2V_C210";
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <65000>;
+ regulator-max-microvolt = <2225000>;
+ regulator-always-on;
+ };
+
+ vint_breg: BUCK2 {
+ regulator-name = "VINT_1.1V_C210";
+ regulator-min-microvolt = <65000>;
+ regulator-max-microvolt = <2225000>;
+ regulator-always-on;
+ };
+
+ vg3d_breg: BUCK3 {
+ regulator-name = "G3D_1.1V";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ camisp_breg: BUCK4 {
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vmem_breg: BUCK5 {
+ regulator-name = "VMEM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vccsub_breg: BUCK7 {
+ regulator-name = "VCC_SUB_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ safe1_sreg: ESAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ };
+
+ safe2_sreg: ESAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-boot-on;
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <60000>;
+ regulator-max-microamp = <2580000>;
+ regulator-always-on;
+ };
+
+ chargercv_reg: CHARGER_CV {
+ regulator-name = "CHARGER_CV";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <4100000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c_7 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+
+ pinctrl-0 = <&i2c7_bus>;
+ pinctrl-names = "default";
+
+ ak8975@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+
+ gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pinctrl_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ sleep0: sleep-states {
+ gpa0-0 {
+ samsung,pins = "gpa0-0";
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ gpa0-1 {
+ samsung,pins = "gpa0-1";
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ gpa0-2 {
+ samsung,pins = "gpa0-2";
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ gpa0-3 {
+ samsung,pins = "gpa0-3";
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+ };
+};
+
+&pinctrl_1 {
+ mhl_int: mhl-int {
+ samsung,pins = "gpf3-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i2c_mhl_bus: i2c-mhl-bus {
+ samsung,pins = "gpf0-4", "gpf0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ usb_sel: usb-sel {
+ samsung,pins = "gpl0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-val = <0>;
+ };
+
+ bt_en: bt-en {
+ samsung,pins = "gpl0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-val = <0>;
+ };
+
+ bt_res: bt-res {
+ samsung,pins = "gpl1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ samsung,pin-val = <0>;
+ };
+
+ otg_gp: otg-gp {
+ samsung,pins = "gpx3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-val = <0>;
+ };
+
+ mag_mhl_gpio: mag-mhl-gpio {
+ samsung,pins = "gpd0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ max8997_irq: max8997-irq {
+ samsung,pins = "gpx0-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ max17042_fuel_irq: max17042-fuel-irq {
+ samsung,pins = "gpx2-3";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ tsp224_irq: tsp224-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ };
+};
+
+&sdhci_0 {
+ status = "okay";
+
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <&vemmc_reg>;
+
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
+ pinctrl-names = "default";
+};
+
+&sdhci_2 {
+ status = "okay";
+
+ bus-width = <4>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vtf_reg>;
+
+ pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
+ pinctrl-names = "default";
+};
+
+&sdhci_3 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ non-removable;
+ bus-width = <4>;
+ mmc-pwrseq = <&wlan_pwrseq>;
+ vmmc-supply = <&vtf_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4330-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpx2>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&serial_0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+
+ shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
+
+&tmu {
+ status = "okay";
+};
--
2.25.1