Re: [00/12] add STM32 FMC2 controller drivers

[Christophe Kerello]

On 3/24/20 1:37 AM, Marek Vasut wrote:
> On 3/23/20 3:58 PM, Christophe Kerello wrote:
> > The FMC2 functional block makes the interface with: synchronous and
> > asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
> > peripherals) and NAND flash memories.
> > Its main purposes are:
> >    - to translate AXI transactions into the appropriate external device
> >      protocol
> >    - to meet the access time requirements of the external devices
> > All external devices share the addresses, data and control signals with the
> > controller. Each external device is accessed by means of a unique Chip
> > Select. The FMC2 performs only one access at a time to an external device.
> >
> > Christophe Kerello (12):
> >    dt-bindings: mfd: stm32-fmc2: add STM32 FMC2 controller documentation
> >    mfd: stm32-fmc2: add STM32 FMC2 controller driver
> >    bus: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
> >    mtd: rawnand: stm32_fmc2: manage all errors cases at probe time
> >    mtd: rawnand: stm32_fmc2: remove useless inline comments
> >    mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_MS for timeouts
> >    mtd: rawnand: stm32_fmc2: cleanup
> >    mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros
> >    mtd: rawnand: stm32_fmc2: move all registers
> >    mtd: rawnand: stm32_fmc2: use regmap APIs
> >    mtd: rawnand: stm32_fmc2: use stm32_fmc2 structure in nfc controller
> >    mtd: rawnand: stm32_fmc2: add new MP1 compatible string
>
> This doesn't apply to either next or 5.6-rc7, do you have a tree
> somewhere with those patches applied ?

Hi Marek,

This implementation has been done on mtd/nand/next branch.

Regards,
Christophe Kerello.