[PATCH v6 10/10] power: supply: Fix Kconfig help text indentiation

[Matti Vaittinen]

Indent the help text as explained in
Documentation/process/coding-style.rst

---

I just learned the help text in Kconfigs should be indented by two
spaces. I fixed this for BD99954 as suggested by Randy and decided
that I could do this for few other entries as well while I was at
it anyways.

Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
---
 drivers/power/supply/Kconfig | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index af96d7fa56b1..f606ba069e4e 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -415,7 +415,7 @@ config CHARGER_PCF50633
 	tristate "NXP PCF50633 MBC"
 	depends on MFD_PCF50633
 	help
-	 Say Y to include support for NXP PCF50633 Main Battery Charger.
+	  Say Y to include support for NXP PCF50633 Main Battery Charger.
 
 config BATTERY_RX51
 	tristate "Nokia RX-51 (N900) battery driver"
@@ -609,15 +609,15 @@ config CHARGER_TPS65090
 	tristate "TPS65090 battery charger driver"
 	depends on MFD_TPS65090
 	help
-	 Say Y here to enable support for battery charging with TPS65090
-	 PMIC chips.
+	  Say Y here to enable support for battery charging with TPS65090
+	  PMIC chips.
 
 config CHARGER_TPS65217
 	tristate "TPS65217 battery charger driver"
 	depends on MFD_TPS65217
 	help
-	 Say Y here to enable support for battery charging with TPS65217
-	 PMIC chips.
+	  Say Y here to enable support for battery charging with TPS65217
+	  PMIC chips.
 
 config BATTERY_GAUGE_LTC2941
 	tristate "LTC2941/LTC2943 Battery Gauge Driver"
@@ -671,16 +671,16 @@ config CHARGER_SC2731
 	tristate "Spreadtrum SC2731 charger driver"
 	depends on MFD_SC27XX_PMIC || COMPILE_TEST
 	help
-	 Say Y here to enable support for battery charging with SC2731
-	 PMIC chips.
+	  Say Y here to enable support for battery charging with SC2731
+	  PMIC chips.
 
 config FUEL_GAUGE_SC27XX
 	tristate "Spreadtrum SC27XX fuel gauge driver"
 	depends on MFD_SC27XX_PMIC || COMPILE_TEST
 	depends on IIO
 	help
-	 Say Y here to enable support for fuel gauge with SC27XX
-	 PMIC chips.
+	  Say Y here to enable support for fuel gauge with SC27XX
+	  PMIC chips.
 
 config CHARGER_UCS1002
 	tristate "Microchip UCS1002 USB Port Power Controller"
@@ -698,9 +698,9 @@ config CHARGER_BD70528
 	select LINEAR_RANGES
 	default n
 	help
-	 Say Y here to enable support for getting battery status
-	 information and altering charger configurations from charger
-	 block of the ROHM BD70528 Power Management IC.
+	  Say Y here to enable support for getting battery status
+	  information and altering charger configurations from charger
+	  block of the ROHM BD70528 Power Management IC.
 
 config CHARGER_BD99954
 	tristate "ROHM bd99954 charger driver"
-- 
2.21.0


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]