Re: [PATCH V6] mfd: da9062: Add support for interrupt polarity defined in device tree

[Lee Jones]

On Wed, 26 Feb 2020, Shreyas Joshi wrote:

> The da9062 interrupt handler cannot necessarily be low active.
> Add a function to configure the interrupt type based on what is defined in the device tree.
> The allowable interrupt type is either low or high level trigger.
> 
> Signed-off-by: Shreyas Joshi <shreyas.joshi@xxxxxxxxx>
> ---
> 
> V6:
>   Changed regmap_reg_range to exclude DA9062AA_CONFIG_B for writeable
>   Added regmap_reg_range DA9062AA_CONFIG_A for readable
> 
> V5:
>   Added #define for DA9062_IRQ_HIGH and DA9062_IRQ_LOW 
> 
> V4:
>   Changed return code to EINVAL rather than EIO for incorrect irq type
>   Corrected regmap_update_bits usage
>   
> V3:
>   Changed regmap_write to regmap_update_bits
> 
> V2:
>   Added function to update the polarity of CONFIG_A IRQ_TYPE
>   
>  drivers/mfd/da9062-core.c | 44 ++++++++++++++++++++++++++++++++++++---
>  1 file changed, 41 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog