[PATCH 4.19 32/65] iio: trigger: stm32-timer: disable master mode when stopping

[Greg Kroah-Hartman]

From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>

commit 29e8c8253d7d5265f58122c0a7902e26df6c6f61 upstream.

Master mode should be disabled when stopping. This mainly impacts
possible other use-case after timer has been stopped. Currently,
master mode remains set (from start routine).

Fixes: 6fb34812c2a2 ("iio: stm32 trigger: Add support for TRGO2 triggers")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/iio/trigger/stm32-timer-trigger.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/drivers/iio/trigger/stm32-timer-trigger.c
+++ b/drivers/iio/trigger/stm32-timer-trigger.c
@@ -161,7 +161,8 @@ static int stm32_timer_start(struct stm3
 	return 0;
 }
 
-static void stm32_timer_stop(struct stm32_timer_trigger *priv)
+static void stm32_timer_stop(struct stm32_timer_trigger *priv,
+			     struct iio_trigger *trig)
 {
 	u32 ccer, cr1;
 
@@ -179,6 +180,12 @@ static void stm32_timer_stop(struct stm3
 	regmap_write(priv->regmap, TIM_PSC, 0);
 	regmap_write(priv->regmap, TIM_ARR, 0);
 
+	/* Force disable master mode */
+	if (stm32_timer_is_trgo2_name(trig->name))
+		regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, 0);
+	else
+		regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0);
+
 	/* Make sure that registers are updated */
 	regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
 }
@@ -197,7 +204,7 @@ static ssize_t stm32_tt_store_frequency(
 		return ret;
 
 	if (freq == 0) {
-		stm32_timer_stop(priv);
+		stm32_timer_stop(priv, trig);
 	} else {
 		ret = stm32_timer_start(priv, trig, freq);
 		if (ret)