[v3 4/6] arm64: dts: sdm845-db845c: Add pm_8998 gpio names

[Robert Foss]

Add pm_8998 GPIO trace names. These names are defined in
the 96boards db845c mezzanine schematic.

Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

Changes since v1:
 - Move gpio-names to previous reference to pm8998_gpio label

 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a6b6837c3d68..efb0086e2aa1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -365,6 +365,34 @@ &mss_pil {
 };
 
 &pm8998_gpio {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"WLAN_SW_CTRL",
+		"NC",
+		"PM_GPIO5_BLUE_BT_LED",
+		"VOL_UP_N",
+		"NC",
+		"ADC_IN1",
+		"PM_GPIO9_YEL_WIFI_LED",
+		"CAM0_AVDD_EN",
+		"NC",
+		"CAM0_DVDD_EN",
+		"PM_GPIO13_GREEN_U4_LED",
+		"DIV_CLK2",
+		"NC",
+		"NC",
+		"NC",
+		"SMB_STAT",
+		"NC",
+		"NC",
+		"ADC_IN2",
+		"OPTION1",
+		"WCSS_PWR_REQ",
+		"PM845_GPIO24",
+		"OPTION2",
+		"PM845_SLB";
+
 	vol_up_pin_a: vol-up-active {
 		pins = "gpio6";
 		function = "normal";
-- 
2.25.1