[v3 1/6] arm64: dts: msm8916: Add i2c-qcom-cci node

[Robert Foss]

From: Loic Poulain <loic.poulain@xxxxxxxxxx>

The msm8916 CCI controller provides one CCI/I2C bus.

Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

Changes since v1:
 - Add label to cci node
 - Sort cci node by address
 - Relabel cci0 i2c bus to cci-i2c0


 arch/arm64/boot/dts/qcom/msm8916.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9f31064f2374..1d5cb3fef906 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1584,6 +1584,33 @@ ports {
 		};
 	};
 
+	cci: cci@1b0c000 {
+		compatible = "qcom,msm8916-cci";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x1b0c000 0x1000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+			<&gcc GCC_CAMSS_CCI_AHB_CLK>,
+			<&gcc GCC_CAMSS_CCI_CLK>,
+			<&gcc GCC_CAMSS_AHB_CLK>;
+		clock-names = "camss_top_ahb", "cci_ahb",
+				  "cci", "camss_ahb";
+		assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+				  <&gcc GCC_CAMSS_CCI_CLK>;
+		assigned-clock-rates = <80000000>, <19200000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cci0_default>;
+		status = "disabled";
+
+		cci_i2c0: i2c-bus@0 {
+			reg = <0>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	smd {
 		compatible = "qcom,smd";
 
-- 
2.25.1