[RFC PATCH 3/3] tty: serial: fsl_lpuart: fix possible console deadlock
From: Michael Walle
Date: Tue Mar 24 2020 - 14:48:23 EST
If the kernel console output is on this console any
dev_{err,warn,info}() may result in a deadlock if the sport->port.lock
spinlock is already held. This is because the _console_write() try to
aquire this lock, too. Remove any error messages where the spinlock is
taken or print after the lock is released.
Reported-by: Leonard Crestez <leonard.crestez@xxxxxxx>
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
drivers/tty/serial/fsl_lpuart.c | 35 +++++++--------------------------
1 file changed, 7 insertions(+), 28 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index bbba298b68a4..0910308b38b1 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -420,7 +420,6 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
struct scatterlist *sgl = sport->tx_sgl;
- struct device *dev = sport->port.dev;
struct dma_chan *chan = sport->dma_tx_chan;
int ret;
@@ -442,10 +441,8 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
ret = dma_map_sg(chan->device->dev, sgl, sport->dma_tx_nents,
DMA_TO_DEVICE);
- if (!ret) {
- dev_err(dev, "DMA mapping error for TX.\n");
+ if (!ret)
return;
- }
sport->dma_tx_desc = dmaengine_prep_slave_sg(chan, sgl,
ret, DMA_MEM_TO_DEV,
@@ -453,7 +450,6 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
if (!sport->dma_tx_desc) {
dma_unmap_sg(chan->device->dev, sgl, sport->dma_tx_nents,
DMA_TO_DEVICE);
- dev_err(dev, "Cannot prepare TX slave DMA!\n");
return;
}
@@ -520,21 +516,12 @@ static int lpuart_dma_tx_request(struct uart_port *port)
struct lpuart_port *sport = container_of(port,
struct lpuart_port, port);
struct dma_slave_config dma_tx_sconfig = {};
- int ret;
dma_tx_sconfig.dst_addr = lpuart_dma_datareg_addr(sport);
dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_tx_sconfig.dst_maxburst = 1;
dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
- ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig);
-
- if (ret) {
- dev_err(sport->port.dev,
- "DMA slave config failed, err = %d\n", ret);
- return ret;
- }
-
- return 0;
+ return dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig);
}
static bool lpuart_is_32(struct lpuart_port *sport)
@@ -1074,8 +1061,8 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
dmastat = dmaengine_tx_status(chan, sport->dma_rx_cookie, &state);
if (dmastat == DMA_ERROR) {
- dev_err(sport->port.dev, "Rx DMA transfer failed!\n");
spin_unlock_irqrestore(&sport->port.lock, flags);
+ dev_err(sport->port.dev, "Rx DMA transfer failed!\n");
return;
}
@@ -1179,23 +1166,17 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
sg_init_one(&sport->rx_sgl, ring->buf, sport->rx_dma_rng_buf_len);
nent = dma_map_sg(chan->device->dev, &sport->rx_sgl, 1,
DMA_FROM_DEVICE);
-
- if (!nent) {
- dev_err(sport->port.dev, "DMA Rx mapping error\n");
+ if (!nent)
return -EINVAL;
- }
dma_rx_sconfig.src_addr = lpuart_dma_datareg_addr(sport);
dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_rx_sconfig.src_maxburst = 1;
dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
- ret = dmaengine_slave_config(chan, &dma_rx_sconfig);
- if (ret < 0) {
- dev_err(sport->port.dev,
- "DMA Rx slave config failed, err = %d\n", ret);
+ ret = dmaengine_slave_config(chan, &dma_rx_sconfig);
+ if (ret < 0)
return ret;
- }
sport->dma_rx_desc = dmaengine_prep_dma_cyclic(chan,
sg_dma_address(&sport->rx_sgl),
@@ -1203,10 +1184,8 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
sport->rx_sgl.length / 2,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
- if (!sport->dma_rx_desc) {
- dev_err(sport->port.dev, "Cannot prepare cyclic DMA\n");
+ if (!sport->dma_rx_desc)
return -EFAULT;
- }
sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
sport->dma_rx_desc->callback_param = sport;
--
2.20.1