[PATCH v2] powerpc/setup_64: Set cache-line-size based on cache-block-size

[Chris Packham]

If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use
the block-size value for both. Per the devicetree spec cache-line-size
is only needed if it differs from the block size.

Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
It looks as though the bsizep = lsizep is not required per the spec but it's
probably safer to retain it.

Changes in v2:
- Scott pointed out that u-boot should be filling in the cache properties
  (which it does). But it does not specify a cache-line-size because it
  provides a cache-block-size and the spec says you don't have to if they are
  the same. So the error is in the parsing not in the devicetree itself.

 arch/powerpc/kernel/setup_64.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index e05e6dd67ae6..dd8a238b54b8 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -516,6 +516,8 @@ static bool __init parse_cache_info(struct device_node *np,
 	lsizep = of_get_property(np, propnames[3], NULL);
 	if (bsizep == NULL)
 		bsizep = lsizep;
+	if (lsizep == NULL)
+		lsizep = bsizep;
 	if (lsizep != NULL)
 		lsize = be32_to_cpu(*lsizep);
 	if (bsizep != NULL)
-- 
2.25.1