Re: [PATCH v2] iio: buffer: Don't allow buffers without any channels enabled to be activated

[Ardelean, Alexandru]

On Wed, 2020-03-25 at 12:01 +0200, Alexandru Ardelean wrote:
> From: Lars-Peter Clausen <lars@xxxxxxxxxx>
> 
> Before activating a buffer make sure that at least one channel is enabled.
> Activating a buffer with 0 channels enabled doesn't make too much sense and
> disallowing this case makes sure that individual driver don't have to add
> special case code to handle it.
> 

oops, i goof-ed peter's email on this send;
[ copy + paste err ]
should be fixed now;

> Currently, without this patch enabling a buffer is possible and no error is
> produced. With this patch -EINVAL is returned.
> 
> An example of execution with this patch and some instrumented print-code:
>    root@analog:~# cd /sys/bus/iio/devices/iio\:device3/buffer
>    root@analog:/sys/bus/iio/devices/iio:device3/buffer# echo 1 > enable
>    0: iio_verify_update 748 indio_dev->masklength 2 *insert_buffer->scan_mask
> 00000000
>    1: iio_verify_update 753
>    2:__iio_update_buffers 1115 ret -22
>    3: iio_buffer_store_enable 1241 ret -22
>    -bash: echo: write error: Invalid argument
> 1, 2 & 3 are exit-error paths. 0 the first print in iio_verify_update()
> rergardless of error path.
> 
> Without this patch (and same instrumented print-code):
>    root@analog:~# cd /sys/bus/iio/devices/iio\:device3/buffer
>    root@analog:/sys/bus/iio/devices/iio:device3/buffer# echo 1 > enable
>    0: iio_verify_update 748 indio_dev->masklength 2 *insert_buffer->scan_mask
> 00000000
>    root@analog:/sys/bus/iio/devices/iio:device3/buffer#
> Buffer is enabled with no error.
> 
> Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> ---
> 
> Changelog v1 -> v2:
> * moved check in iio_verify_update()
> * added dev_dbg() message; should help some folks understand the message
> * documented steps to reproduce
> * added Fixes tag; hopefully the tag is the good one; if needed, it can be
>   dropped; this has been around for ~8 years; no idea if it's worth
>   backporting
> 
>  drivers/iio/industrialio-buffer.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-
> buffer.c
> index 5ff34ce8b6a2..e6fa1a4e135d 100644
> --- a/drivers/iio/industrialio-buffer.c
> +++ b/drivers/iio/industrialio-buffer.c
> @@ -686,6 +686,13 @@ static int iio_verify_update(struct iio_dev *indio_dev,
>  	bool scan_timestamp;
>  	unsigned int modes;
>  
> +	if (insert_buffer &&
> +	    bitmap_empty(insert_buffer->scan_mask, indio_dev->masklength)) {
> +		dev_dbg(&indio_dev->dev,
> +			"At least one scan element must be enabled first\n");
> +		return -EINVAL;
> +	}
> +
>  	memset(config, 0, sizeof(*config));
>  	config->watermark = ~0;
>