RE: [PATCH 1/3] dt-bindings: ath10k: Add wifi-firmware subnode for wifi node
From: pillair
Date: Wed Mar 25 2020 - 07:00:48 EST
Hi Kalle,
I had tested it on a slightly older ath10k tree, and missed a few cleanup while rebasing it on the ath10k tree tip.
I have now fixed these build errors and will send out v2 for this patchset.
Thanks,
Rakesh Pillai.
> -----Original Message-----
> From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
> Sent: Tuesday, March 24, 2020 7:44 PM
> To: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
> Cc: ath10k@xxxxxxxxxxxxxxxxxxx; linux-wireless@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Rakesh Pillai
> <pillair@xxxxxxxxxxxxxx>
> Subject: Re: [PATCH 1/3] dt-bindings: ath10k: Add wifi-firmware subnode for
> wifi node
>
> Rakesh Pillai <pillair@xxxxxxxxxxxxxx> wrote:
>
> > Add a wifi-firmware subnode for the wifi node.
> > This wifi-firmware subnode is needed for the
> > targets which do not support TrustZone.
> >
> > Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
>
> Fails to build and has warnings. How did you test this?
>
> drivers/net/wireless/ath/ath10k/qmi.c: In function
> 'ath10k_qmi_msa_mem_info_send_sync_msg':
> drivers/net/wireless/ath/ath10k/qmi.c:160:23: error: 'struct ath10k_qmi' has
> no member named 'msa_pa'
> max_mapped_addr = qmi->msa_pa + qmi->msa_mem_size;
> ^~
> drivers/net/wireless/ath/ath10k/qmi.c:160:37: error: 'struct ath10k_qmi' has
> no member named 'msa_mem_size'
> max_mapped_addr = qmi->msa_pa + qmi->msa_mem_size;
> ^~
> drivers/net/wireless/ath/ath10k/qmi.c:163:41: error: 'struct ath10k_qmi' has
> no member named 'msa_mem_size'
> if (resp.mem_region_info[i].size > qmi->msa_mem_size ||
> ^~
> drivers/net/wireless/ath/ath10k/qmi.c:165:48: error: 'struct ath10k_qmi' has
> no member named 'msa_pa'
> resp.mem_region_info[i].region_addr < qmi->msa_pa ||
> ^~
> make[5]: *** [drivers/net/wireless/ath/ath10k/qmi.o] Error 1
> make[5]: *** Waiting for unfinished jobs....
> In file included from ./include/linux/byteorder/little_endian.h:5,
> from ./arch/x86/include/uapi/asm/byteorder.h:5,
> from ./include/asm-generic/bitops/le.h:6,
> from ./arch/x86/include/asm/bitops.h:395,
> from ./include/linux/bitops.h:29,
> from ./include/linux/kernel.h:12,
> from ./include/linux/clk.h:13,
> from drivers/net/wireless/ath/ath10k/snoc.c:6:
> drivers/net/wireless/ath/ath10k/snoc.c: In function
> 'ath10k_msa_dump_memory':
> drivers/net/wireless/ath/ath10k/snoc.c:1424:54: error: 'struct ath10k_qmi'
> has no member named 'msa_va'
> hdr->start = cpu_to_le32((unsigned long)ar_snoc->qmi->msa_va);
> ^~
> ./include/uapi/linux/byteorder/little_endian.h:33:51: note: in definition of
> macro '__cpu_to_le32'
> #define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
> ^
> drivers/net/wireless/ath/ath10k/snoc.c:1424:15: note: in expansion of macro
> 'cpu_to_le32'
> hdr->start = cpu_to_le32((unsigned long)ar_snoc->qmi->msa_va);
> ^~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/snoc.c:1425:40: error: 'struct ath10k_qmi'
> has no member named 'msa_mem_size'
> hdr->length = cpu_to_le32(ar_snoc->qmi->msa_mem_size);
> ^~
> ./include/uapi/linux/byteorder/little_endian.h:33:51: note: in definition of
> macro '__cpu_to_le32'
> #define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
> ^
> drivers/net/wireless/ath/ath10k/snoc.c:1425:16: note: in expansion of macro
> 'cpu_to_le32'
> hdr->length = cpu_to_le32(ar_snoc->qmi->msa_mem_size);
> ^~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/snoc.c:1427:40: error: 'struct ath10k_qmi'
> has no member named 'msa_mem_size'
> if (current_region->len < ar_snoc->qmi->msa_mem_size) {
> ^~
> drivers/net/wireless/ath/ath10k/snoc.c:1428:27: error: 'struct ath10k_qmi'
> has no member named 'msa_va'
> memcpy(buf, ar_snoc->qmi->msa_va, current_region->len);
> ^~
> drivers/net/wireless/ath/ath10k/snoc.c:1430:41: error: 'struct ath10k_qmi'
> has no member named 'msa_mem_size'
> current_region->len, ar_snoc->qmi->msa_mem_size);
> ^~
> drivers/net/wireless/ath/ath10k/snoc.c:1432:27: error: 'struct ath10k_qmi'
> has no member named 'msa_va'
> memcpy(buf, ar_snoc->qmi->msa_va, ar_snoc->qmi->msa_mem_size);
> ^~
> drivers/net/wireless/ath/ath10k/snoc.c:1432:49: error: 'struct ath10k_qmi'
> has no member named 'msa_mem_size'
> memcpy(buf, ar_snoc->qmi->msa_va, ar_snoc->qmi->msa_mem_size);
> ^~
> drivers/net/wireless/ath/ath10k/snoc.c: In function 'ath10k_fw_deinit':
> drivers/net/wireless/ath/ath10k/snoc.c:1593:14: error: assignment of read-
> only variable 'mapped_size'
> mapped_size = ar_snoc->fw.mapped_mem_size;
> ^
> drivers/net/wireless/ath/ath10k/snoc.c:1599:46: warning: format '%d'
> expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long
> unsigned int'} [-Wformat=]
> ath10k_err(ar, "failed to unmap firmware: %d\n",
> ~^
> %ld
> unmapped_size);
> ~~~~~~~~~~~~~
> make[5]: *** [drivers/net/wireless/ath/ath10k/snoc.o] Error 1
> make[4]: *** [drivers/net/wireless/ath/ath10k] Error 2
> make[3]: *** [drivers/net/wireless/ath] Error 2
> make[2]: *** [drivers/net/wireless] Error 2
> make[1]: *** [drivers/net] Error 2
> make: *** [drivers] Error 2
>
> 3 patches set to Changes Requested.
>
> 11455345 [1/3] dt-bindings: ath10k: Add wifi-firmware subnode for wifi node
> 11455351 [2/3] ath10k: Setup the msa resources before qmi init
> 11455353 [3/3] ath10k: Add support for targets without trustzone
>
> --
> https://patchwork.kernel.org/patch/11455345/
>
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingp
> atches