[PATCH DON'T APPLY v2 2/7] dt-bindings: serial: Add binding for rs485 bus termination GPIO

[Heiko Stuebner]

From: Lukas Wunner <lukas@xxxxxxxxx>

Commit e8759ad17d41 ("serial: uapi: Add support for bus termination")
introduced the ability to enable rs485 bus termination from user space.
So far the feature is only used by a single driver, 8250_exar.c, using a
hardcoded GPIO pin specific to Siemens IOT2040 products.

Provide for a more generic solution by allowing specification of an
rs485 bus termination GPIO pin in the device tree.  An upcoming commit
implements support for this pin for any 8250 driver.  The binding is
used in device trees of the "Revolution Pi" PLCs offered by KUNBUS.

Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
Cc: Sascha Weisenberger <sascha.weisenberger@xxxxxxxxxxx>
Cc: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
[moved to yaml rs485 binding]
Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/serial/rs485.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index d4beaf11222d..a9ad17864889 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -43,3 +43,7 @@ properties:
   rs485-rx-during-tx:
    description: enables the receiving of data even while sending data.
    $ref: /schemas/types.yaml#/definitions/flag
+
+  rs485-term-gpios:
+    description: GPIO pin to enable RS485 bus termination.
+    maxItems: 1
-- 
2.24.1