[PATCH v4 5/5] ARM: iop32x: replace setup_irq() by request_irq()

[afzal mohammed]

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@xxxxxxxxx>
---

v4:
 * No change

v3:
 * Split out from series, also split out from ARM patch to subarch level
	as Thomas suggested to take it thr' respective maintainers
 * Modify string displayed in case of error as suggested by Thomas
 * Re-arrange code as required to improve readability
 * Remove irrelevant parts from commit message & improve
 
v2:
 * Replace pr_err("request_irq() on %s failed" by
           pr_err("%s: request_irq() failed"
 * Commit message massage

 arch/arm/mach-iop32x/time.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
index 18a4df5c1baa..ae533b66fefd 100644
--- a/arch/arm/mach-iop32x/time.c
+++ b/arch/arm/mach-iop32x/time.c
@@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction iop_timer_irq = {
-	.name		= "IOP Timer Tick",
-	.handler	= iop_timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &iop_clockevent,
-};
-
 static unsigned long iop_tick_rate;
 unsigned long get_iop_tick_rate(void)
 {
@@ -154,6 +147,7 @@ EXPORT_SYMBOL(get_iop_tick_rate);
 void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
+	int irq = IRQ_IOP32X_TIMER0;
 
 	sched_clock_register(iop_read_sched_clock, 32, tick_rate);
 
@@ -168,7 +162,9 @@ void __init iop_init_time(unsigned long tick_rate)
 	 */
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	write_tisr(1);
-	setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq);
+	if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"IOP Timer Tick", &iop_clockevent))
+		pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
 	iop_clockevent.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&iop_clockevent, tick_rate,
 					0xf, 0xfffffffe);
-- 
2.25.1