Re: [PATCH 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's

[Al Cooper]

On Fri, Mar 13, 2020 at 12:18 PM Andy Shevchenko
<andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
>
> On Fri, Mar 13, 2020 at 10:15:41AM -0400, Al Cooper wrote:
> > This adds support for the XHCI, EHCI and OHCI host controllers found
> > in Broadcom STB SoC's. These drivers depend on getting access to the
> > new Broadcom STB USB PHY driver through a device-tree phandle and
> > will fail if the driver is not available.
>
> Hint to the future:
>
>         scripts/get_maintainer.pl --git --git-min-percent=67 ...

Thanks, I'll use that in the future.

>
> >
> > Al Cooper (4):
> >   dt-bindings: Add Broadcom STB USB support
> >   usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
> >   usb: ehci: Add new EHCI driver for Broadcom STB SoC's
> >   usb: host: Add ability to build new Broadcom STB USB drivers
> >
> >  .../bindings/usb/brcm,bcm7445-ehci.yaml       |  60 ++++
> >  .../devicetree/bindings/usb/usb-xhci.txt      |   1 +
> >  MAINTAINERS                                   |   9 +
> >  drivers/usb/host/Kconfig                      |  20 ++
> >  drivers/usb/host/Makefile                     |  20 +-
> >  drivers/usb/host/ehci-brcm.c                  | 288 ++++++++++++++++++
> >  drivers/usb/host/xhci-brcm.c                  |  16 +
> >  drivers/usb/host/xhci-brcm.h                  |  16 +
> >  drivers/usb/host/xhci-plat.c                  |  11 +
> >  9 files changed, 435 insertions(+), 6 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
> >  create mode 100644 drivers/usb/host/ehci-brcm.c
> >  create mode 100644 drivers/usb/host/xhci-brcm.c
> >  create mode 100644 drivers/usb/host/xhci-brcm.h
> >
> > --
> > 2.17.1
> >
>
> --
> With Best Regards,
> Andy Shevchenko
>
>