Re: [PATCH v4 3/5] iio: adc: mp2629: Add support for mp2629 ADC driver
From: Jonathan Cameron
Date: Sat Mar 28 2020 - 10:42:44 EST
On Mon, 23 Mar 2020 01:32:34 +0200
Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
> On Mon, Mar 23, 2020 at 12:47 AM Saravanan Sekar <sravanhome@xxxxxxxxx> wrote:
> >
> > Add support for 8-bit resolution ADC readings for input power
> > supply and battery charging measurement. Provides voltage, current
> > readings to mp2629 power supply driver.
>
> ...
>
> > +#include <linux/platform_device.h>
>
> > +#include <linux/of_device.h>
>
> Don't see users of it.
>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/regulator/consumer.h>
>
> > +#include <linux/sysfs.h>
>
> Any users?
>
> > +#include <linux/regmap.h>
>
> Perhaps ordered?
>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/machine.h>
> > +#include <linux/iio/driver.h>
>
> + blank line?
>
> > +#include <linux/mfd/mp2629.h>
>
> ...
>
> > +static int mp2629_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val, int *val2, long mask)
> > +{
> > + struct mp2629_adc *info = iio_priv(indio_dev);
> > + unsigned int rval;
> > + int ret;
> > +
> > + switch (mask) {
> > + case IIO_CHAN_INFO_RAW:
> > + ret = regmap_read(info->regmap, chan->address, &rval);
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (chan->address == MP2629_INPUT_VOLT)
>
> > + rval &= 0x7f;
>
> GENMASK() ?
>
> > + *val = rval;
> > + return IIO_VAL_INT;
>
> > + return 0;
> > +}
>
> ...
>
> > + void **pdata = pdev->dev.platform_data;
>
> Same Qs as per other patch.
>
> ...
>
> > + indio_dev->dev.of_node = pdev->dev.of_node;
>
> Jonathan, doesn't IIO core do this for all?
>
Nope. I'm not totally sure it's always safe to do so
as we have some weird parent structures in some cases.
A quick grep suggests that we may be fine though, or
alternatively be able to get away with a set it if not
already set approach.
I'll take a look when I get some time. It would be nice
to clean this up.
Jonathan