Re: Re: [PATCH v4 1/4] dt-bindings: net: phy: Add support for NXP TJA11xx

[Oleksij Rempel]

Hi,

On Mon, Mar 23, 2020 at 04:14:23PM +0100, Andrew Lunn wrote:
> > Yes, it is one device with two address. This is if you call the entire IC a device. If you look at it from a PHY perspective, it is two devices with 1 address.
> > If you just look at it as a single device, it gets difficult to add PHY specific properties in the future, e.g. master/slave selection.
> 
> > In my opinion its important to have some kind of container for the
> > entire IC, but likewise for the individual PHYs.
> 
> Yes, we need some sort of representation of two devices.
> 
> Logically, the two PHYs are on the same MDIO bus, so you could have
> two nodes on the main bus.
> 
> Or you consider the secondary PHY as being on an internal MDIO bus
> which is transparently bridged to the main bus. This is what was
> proposed in the last patchset.
> 
> Because this bridge is transparent, the rest of the PHY/MDIO framework
> has no idea about it. So i prefer that we keep with two PHY nodes on
> the main bus. But i still think we need the master PHY to register the
> secondary PHY, due to the missing PHY ID, and the other constrains
> like resets which the master PHY has to handle.

this discussion is stalled.
What is the final decision? What is the proper and mainlinable way?

Regards,
Oleksij
--
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |