Re: [PATCH v6 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver

[Matthias Kaehlcke]

On Mon, Mar 30, 2020 at 11:19:11AM +0300, Felipe Balbi wrote:
> 
> Hi,
> 
> Matthias Kaehlcke <mka@xxxxxxxxxxxx> writes:
> >> Add interconnect support in dwc3-qcom driver to vote for bus
> >> bandwidth.
> >> 
> >> This requires for two different paths - from USB master to
> >> DDR slave. The other is from APPS master to USB slave.
> >> 
> >> Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> >> Signed-off-by: Chandana Kishori Chiluveru <cchiluve@xxxxxxxxxxxxxx>
> >> Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> >> ---
> >>  drivers/usb/dwc3/dwc3-qcom.c | 128 ++++++++++++++++++++++++++++++++++++++++++-
> >>  1 file changed, 126 insertions(+), 2 deletions(-)
> >> 
> >> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> >> index 1dfd024..7e85fe6 100644
> >> --- a/drivers/usb/dwc3/dwc3-qcom.c
> >> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> >>
> >> ...
> >>
> >> +/* To disable an interconnect, we just set its bandwidth to 0 */
> >> +static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
> >> +{
> >> +	int ret;
> >> +
> >> +	ret = icc_set_bw(qcom->usb_ddr_icc_path, 0, 0);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	ret = icc_set_bw(qcom->apps_usb_icc_path, 0, 0);
> >> +	if (ret)
> >> +		goto err_reenable_memory_path;
> >> +
> >> +	return 0;
> >> +
> >> +	/* Re-enable things in the event of an error */
> >> +err_reenable_memory_path:
> >> +	ret = dwc3_qcom_interconnect_enable(qcom);
> >
> > This overwrites the error that led to the execution of this code path.
> > The function should return original error, not the result of the
> > _interconnect_enable() call.
> >
> > I saw Felipe queued the patch for v5.8. I think the main options to fix this
> > are:
> >
> > - a v6 of this patch to replace v5 in Felipe's tree (which IIUC will be rebased
> >   anyway once there is a v5.7-rc)
> > - send the fix as a separate patch
> > - Felipe amends the patch in his tree
> >
> > Felipe, what would work best for you?
> 
> Let's go for a v6, which commits should I drop? I can't find anything
> related to $subject in my queue:
> 
> $ git --no-pager log --oneline HEAD ^linus/master -- drivers/usb/dwc3/dwc3-qcom.c
> 201c26c08db4 usb: dwc3: qcom: Replace <linux/clk-provider.h> by <linux/of_clk.h>

I thought I saw a "queued for v5.8" message from you, but can't find that back.
I guess I saw the "queued" message for the "Add USB DWC3 support for SC7180"
series and thought it was for this one. Sorry for the confusion.