Re: [PATCH v5 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor

[Ivan Mikhaylov]

On Mon, 2020-03-30 at 22:07 +0300, Andy Shevchenko wrote:
> On Mon, Mar 30, 2020 at 6:27 PM Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx> wrote:
> > Proximity sensor driver based on light/vcnl4000.c code.
> > For now supports only the single on-demand measurement.
> > 
> > The VCNL3020 is a fully integrated proximity sensor. Fully
> > integrated means that the infrared emitter is included in the
> > package. It has 16-bit resolution. It includes a signal
> > processing IC and features standard I2C communication
> > interface. It features an interrupt function.
> 
> Still my tag applies, but
> I have few more comments below.
> 
> ...
> 
> > +#define VCNL_DRV_NAME          "vcnl3020"
> > +#define VCNL_REGMAP_NAME       "vcnl3020_regmap"
> 
> I'm wondering why you need the second one.

For regmap initialize as name in 
static const struct regmap_config vcnl3020_regmap_config = {
       .name           = VCNL_REGMAP_NAME,

I can get rid of it from struct with name definition.

> > +       rc = device_property_read_u32(data->dev, "vishay,led-current-
> > milliamp",
> > +                                     &led_current);
> > +       if (rc == 0) {
> > +               rc = regmap_write(data->regmap, VCNL_LED_CURRENT,
> > led_current);
> > +               if (rc)
> > +                       dev_err(data->dev,
> > +                               "Error (%d) setting LED current", rc);
> > +       }
> > +
> > +       return rc;
> 
> Why not to use standard pattern, i.e.
> 
>   if (rc)
>     return rc;
>   ...
>   rc = regmap_write(...);
> 
> ?

Optional parameter. There exists a lot of ways to do it:

rc = device_property_read_u32(dev, "milliamp", &led_current);
rc = regmap_write(regmap, VCNL_LED_CURRENT, (!rc) : led_current ? 0);
or

rc = regmap_write(regmap, VCNL_LED_CURRENT, (!rc) : led_current ?
VCNL_LED_CURRENT_DEFAULT);
or even maybe make a function like get_led_current:

rc = regmap_write(regmap, VCNL_LED_CURRENT, get_led_curent(dev));
where 
static u32 get_led_current(dev) {
	u32 led_current;
	rc = device_property_read_u32(dev, "milliamp", &led_current);
	return (!rc) : led_current ? VCNL_LED_CURRENT_DEFAULT;
}
Which one would be more preferable?

> ...
> 
> > +       if (rc) {
> > +               dev_err(data->dev,
> > +                       "vcnl3020_measure() failed with error (%d)", rc);
> 
> Perhaps you keep same pattern for error messages as in previous function(s).

Sure.

> 
> > +               goto err_unlock;
> > +       }
> > +       rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &res, 2);
> 
> sizeof(res)

Oops.