Re: [PATCH v2] ARM: imx: allow to disable board specific PHY fixups

[Marc Kleine-Budde]

On 3/31/20 9:54 AM, Russell King - ARM Linux admin wrote:
> On Tue, Mar 31, 2020 at 09:47:19AM +0200, Marc Kleine-Budde wrote:
>> On 3/30/20 7:41 PM, Russell King - ARM Linux admin wrote:
>>>>> arch/arm/mach-imx/mach-imx6q.c:167:		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
>>>>> arch/arm/mach-imx/mach-imx6q.c:169:		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
>>>>> arch/arm/mach-imx/mach-imx6q.c:171:		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
>>>>> arch/arm/mach-imx/mach-imx6q.c:173:		phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
>>>
>>> As far as I'm concerned, the AR8035 fixup is there with good reason.
>>> It's not just "random" but is required to make the AR8035 usable with
>>> the iMX6 SoCs.  Not because of a board level thing, but because it's
>>> required for the AR8035 to be usable with an iMX6 SoC.
>>
>> Is this still ture, if the AR8035 is attached to a switch behind an iMX6?
> 
> Do you know of such a setup, or are you talking about theoretical
> situations?

Granted, not for the AR8035, but for one of the KSZ Phys. This is why
Oleksij started looking into this issue in the first place.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |