[PATCH 14/23] floppy: cleanup: make result() not rely on current_fdc anymore
From: Willy Tarreau
Date: Tue Mar 31 2020 - 05:41:53 EST
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
It's worth noting that there's still a single reply_buffer[] which
will store the result for the current fdc. It may or may not make
sense to implement one buffer per fdc in the future.
Signed-off-by: Willy Tarreau <w@xxxxxx>
---
drivers/block/floppy.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 81fd06eaea7d..4aaf84217b53 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -1153,13 +1153,13 @@ static int output_byte(int fdc, char byte)
}
/* gets the response from the fdc */
-static int result(void)
+static int result(int fdc)
{
int i;
int status = 0;
for (i = 0; i < MAX_REPLIES; i++) {
- status = wait_til_ready(current_fdc);
+ status = wait_til_ready(fdc);
if (status < 0)
break;
status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
@@ -1169,16 +1169,16 @@ static int result(void)
return i;
}
if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY))
- reply_buffer[i] = fdc_inb(current_fdc, FD_DATA);
+ reply_buffer[i] = fdc_inb(fdc, FD_DATA);
else
break;
}
if (initialized) {
DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
- current_fdc, status, i);
- show_floppy(current_fdc);
+ fdc, status, i);
+ show_floppy(fdc);
}
- fdc_state[current_fdc].reset = 1;
+ fdc_state[fdc].reset = 1;
return -1;
}
@@ -1194,7 +1194,7 @@ static int need_more_output(void)
if (is_ready_state(status))
return MORE_OUTPUT;
- return result();
+ return result(current_fdc);
}
/* Set perpendicular mode as required, based on data rate, if supported.
@@ -1524,7 +1524,7 @@ static void setup_rw_floppy(void)
}
if (!(flags & FD_RAW_INTR)) {
- inr = result();
+ inr = result(current_fdc);
cont->interrupt();
} else if (flags & FD_RAW_NEED_DISK)
fd_watchdog();
@@ -1568,7 +1568,7 @@ static void check_wp(void)
/* check write protection */
output_byte(current_fdc, FD_GETSTATUS);
output_byte(current_fdc, UNIT(current_drive));
- if (result() != 1) {
+ if (result(current_fdc) != 1) {
fdc_state[current_fdc].reset = 1;
return;
}
@@ -1742,14 +1742,14 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
do_print = !handler && print_unex && initialized;
- inr = result();
+ inr = result(current_fdc);
if (do_print)
print_result("unexpected interrupt", inr);
if (inr == 0) {
int max_sensei = 4;
do {
output_byte(current_fdc, FD_SENSEI);
- inr = result();
+ inr = result(current_fdc);
if (do_print)
print_result("sensei", inr);
max_sensei--;
@@ -1782,7 +1782,7 @@ static void recalibrate_floppy(void)
static void reset_interrupt(void)
{
debugt(__func__, "");
- result(); /* get the status ready for set_fdc */
+ result(current_fdc); /* get the status ready for set_fdc */
if (fdc_state[current_fdc].reset) {
pr_info("reset set in interrupt, calling %ps\n", cont->error);
cont->error(); /* a reset just after a reset. BAD! */
@@ -4305,7 +4305,7 @@ static char __init get_fdc_version(void)
output_byte(current_fdc, FD_DUMPREGS); /* 82072 and better know DUMPREGS */
if (fdc_state[current_fdc].reset)
return FDC_NONE;
- r = result();
+ r = result(current_fdc);
if (r <= 0x00)
return FDC_NONE; /* No FDC present ??? */
if ((r == 1) && (reply_buffer[0] == 0x80)) {
@@ -4332,7 +4332,7 @@ static char __init get_fdc_version(void)
}
output_byte(current_fdc, FD_UNLOCK);
- r = result();
+ r = result(current_fdc);
if ((r == 1) && (reply_buffer[0] == 0x80)) {
pr_info("FDC %d is a pre-1991 82077\n", current_fdc);
return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know
@@ -4344,7 +4344,7 @@ static char __init get_fdc_version(void)
return FDC_UNKNOWN;
}
output_byte(current_fdc, FD_PARTID);
- r = result();
+ r = result(current_fdc);
if (r != 1) {
pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
current_fdc, r);
--
2.20.1