Re: [PATCH v3 1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm

[Wesley Cheng]

On 4/10/2020 7:13 PM, Stephen Boyd wrote:
> Quoting Wesley Cheng (2020-04-07 15:23:26)
>> diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-7nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-7nm.yaml
>> new file mode 100644
>> index 0000000..7292e27
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-7nm.yaml
>> @@ -0,0 +1,76 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-7nm.yaml#";
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
>> +
>> +title: Qualcomm Synopsys 7nm High-Speed USB PHY
>> +
>> +maintainers:
>> +  - Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
>> +
>> +description: |
>> +  Qualcomm Hi-Speed 7nm USB PHY
> 
> High?
> 

Hi Stephen,

Will fix it.

>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,usb-snps-hs-7nm-phy
>> +      - qcom,sm8150-usb-hs-phy
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  "#phy-cells":
>> +    const: 0
>> +
>> +  clocks:
>> +    items:
>> +      - description: rpmhcc ref clock
>> +
>> +  clock-names:
>> +    items:
>> +      - const: ref
>> +
>> +  resets:
>> +    items:
>> +      - description: PHY core reset
>> +
>> +  vdda-pll-supply:
>> +    description: phandle to the regulator VDD supply node.
>> +
>> +  vdda18-supply:
>> +    description: phandle to the regulator 1.8V supply node.
>> +
>> +  vdda33-supply:
>> +    description: phandle to the regulator 3.3V supply node.
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - "#phy-cells"
>> +  - clocks
>> +  - clock-names
>> +  - resets
>> +  - vdda-pll-supply
>> +  - vdda18-supply
>> +  - vdda33-supply
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/qcom,rpmh.h>
>> +    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
>> +    usb_1_hsphy: phy@88e2000 {
> 
> Is the label necessary? Best to drop it if not.
> 

I'll drop the label.

>> +        compatible = "qcom,sm8150-usb-hs-phy";
>> +        reg = <0 0x088e2000 0 0x400>;
>> +        status = "disabled";
> 
> I think we can leave out status in examples.
> 

Will do.

>> +        #phy-cells = <0>;
>> +
>> +        clocks = <&rpmhcc RPMH_CXO_CLK>;
>> +        clock-names = "ref";
>> +
>> +        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
>> +    };
>> +...
>> \ No newline at end of file
> 
> Why no newline at end of file?
> 

Got it, I'll add a newline.

>> -- 
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project