[PATCH 0/4] Add driver for wsen-itds accelerometer sensor

[Saravanan Sekar]

The patch series add support for wurth elektronic wsen-itds 3-axis
accelerometer. Driver supports the acceleration, temperature data reading and
supports configuring of output data rate, operating mode and scale.

Thanks,
Saravanan

Saravanan Sekar (4):
  dt-bindings: Add an entry for WÃrth Elektronik, we
  dt-bindings: iio: add document bindings for wsen-itds accel sensor
  iio: accel: Add driver for wsen-itds accelerometer sensor
  MAINTAINERS: Add entry for wsen-itds accelerometer sensor

 .../bindings/iio/accel/we,wsen-itds.yaml      |  53 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   6 +
 drivers/iio/accel/Kconfig                     |  14 +
 drivers/iio/accel/Makefile                    |   1 +
 drivers/iio/accel/wsen-itds.c                 | 978 ++++++++++++++++++
 6 files changed, 1054 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/we,wsen-itds.yaml
 create mode 100644 drivers/iio/accel/wsen-itds.c

-- 
2.17.1