Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger

[Lee Jones]

On Fri, 24 Apr 2020, saravanan sekar wrote:

> Hi Lee,
> 
> On 24/04/20 9:18 am, Lee Jones wrote:
> > On Wed, 15 Apr 2020, Saravanan Sekar wrote:
> > 
> > > mp2629 is a highly-integrated switching-mode battery charge management
> > > device for single-cell Li-ion or Li-polymer battery.
> > > 
> > > Add MFD core enables chip access for ADC driver for battery readings,
> > > and a power supply battery-charger driver
> > > 
> > > Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>
> > > ---
> > >   drivers/mfd/Kconfig        |  9 ++++
> > >   drivers/mfd/Makefile       |  2 +
> > >   drivers/mfd/mp2629.c       | 86 ++++++++++++++++++++++++++++++++++++++
> > >   include/linux/mfd/mp2629.h | 19 +++++++++
> > >   4 files changed, 116 insertions(+)
> > >   create mode 100644 drivers/mfd/mp2629.c
> > >   create mode 100644 include/linux/mfd/mp2629.h
> > How is this driver registered?
> > 
> > Looks like it has device tree support.  Is there another way?
> Yes, only using device tree

Then how about using 'simple-mfd' and 'syscon'?

Then you can omit this driver completely.

> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index 3c547ed575e6..85be799795aa 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -434,6 +434,15 @@ config MFD_MC13XXX_I2C
> > >   	help
> > >   	  Select this if your MC13xxx is connected via an I2C bus.
> > > +config MFD_MP2629
> > > +	tristate "Monolithic power system MP2629 ADC and Battery charger"
> > > +	depends on I2C
> > > +	select REGMAP_I2C
> > > +	help
> > > +	  Select this option to enable support for monolithic power system
> > > +	  battery charger. This provides ADC, thermal, battery charger power
> > > +	  management functions on the systems.

-- 
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog