On Fri, 24 Apr 2020, saravanan sekar wrote:The exception is to support for non device tree platform as well, but I have tested only for ARM device tree platform.
Hi Lee,Then how about using 'simple-mfd' and 'syscon'?
On 24/04/20 9:18 am, Lee Jones wrote:
On Wed, 15 Apr 2020, Saravanan Sekar wrote:Yes, only using device tree
mp2629 is a highly-integrated switching-mode battery charge managementHow is this driver registered?
device for single-cell Li-ion or Li-polymer battery.
Add MFD core enables chip access for ADC driver for battery readings,
and a power supply battery-charger driver
Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>
---
drivers/mfd/Kconfig | 9 ++++
drivers/mfd/Makefile | 2 +
drivers/mfd/mp2629.c | 86 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/mp2629.h | 19 +++++++++
4 files changed, 116 insertions(+)
create mode 100644 drivers/mfd/mp2629.c
create mode 100644 include/linux/mfd/mp2629.h
Looks like it has device tree support. Is there another way?
Then you can omit this driver completely.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3c547ed575e6..85be799795aa 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -434,6 +434,15 @@ config MFD_MC13XXX_I2C
help
Select this if your MC13xxx is connected via an I2C bus.
+config MFD_MP2629
+ tristate "Monolithic power system MP2629 ADC and Battery charger"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Select this option to enable support for monolithic power system
+ battery charger. This provides ADC, thermal, battery charger power
+ management functions on the systems.