Re: [PATCH 0/2] iio: adc: Add a current from voltage driver

[Lars-Peter Clausen]

On 5/16/20 4:26 AM, Jonathan Bakker wrote:
> In the discussion around adding the GP2A002 light driver, there came
> up the question of what to do when a system emulates a current ADC
> by using a voltage ADC and a resistor.  Rather than adding it on
> a per-driver basis, it was suggested(1) to add a minimal IIO driver
> to support this situation.
>
> The new driver is fairly simple - it simply takes a voltage ADC and
> a resistor value in ohms exposed as the scale and outputs a current.
>
> It has been tested on a first-gen Galaxy S device which has the above
> mentioned GP2A002 chip connected to the voltage ADC resistor complex.
>
> 1) https://lore.kernel.org/linux-iio/20200202150843.762c6897@archlinux/

Hi,

There is afe/iio-rescale.c, which I think already implements this 
functionality.

- Lars