Re: [PATCH 0/2] iio: adc: Add a current from voltage driver

[Jonathan Bakker]

Oops, sorry about that, you're absolutely right.  The current-sense-shunt part
of iio-rescale is exactly what I was looking for.

Thanks,
Jonathan

On 2020-05-15 11:28 p.m., Lars-Peter Clausen wrote:
> On 5/16/20 4:26 AM, Jonathan Bakker wrote:
>> In the discussion around adding the GP2A002 light driver, there came
>> up the question of what to do when a system emulates a current ADC
>> by using a voltage ADC and a resistor. Rather than adding it on
>> a per-driver basis, it was suggested(1) to add a minimal IIO driver
>> to support this situation.
>>
>> The new driver is fairly simple - it simply takes a voltage ADC and
>> a resistor value in ohms exposed as the scale and outputs a current.
>>
>> It has been tested on a first-gen Galaxy S device which has the above
>> mentioned GP2A002 chip connected to the voltage ADC resistor complex.
>>
>> 1) https://lore.kernel.org/linux-iio/20200202150843.762c6897@archlinux/
> 
> Hi,
> 
> There is afe/iio-rescale.c, which I think already implements this functionality.
> 
> - Lars
> 
>